GEAR & BEARING GP-SWING 1141564 - Caterpillar

1141564 GEAR & BEARING GP-SWING Caterpillar parts 307B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1141564
114-1564
1141564

Caterpillar 1141564 GEAR & BEARING GP-SWING

Buy GEAR & BEARING GP-SWING 1141564 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 1141564:

MINI HYD EXCAVATOR 307B Caterpillar

Number on catalog scheme:

Caterpillar 1141564 Parts scheme GEAR & BEARING GP-SWING

For full view, you need register

Information:

Illustration 1 g01415182
(2) Wiring harnesses (1) Lightly lubricate the bore of the adapter for the ignition transformer group with the lubricant that is being sealed.Note: Apply 4C-9614 Silicone Sealant to the mating face of the harness connector. Install the connector within ten minutes in order to avoid hardening before the seal has been made. Note: Align the connector with the notch in the uppermost position. (3) Spark plug Torque for spark plug ... 26 4 N m (19 3 lb ft) Electrode gap ... 0.40 to 0.46 mm (0.016 to 0.018 inch)
Illustration 2 g01415183
View of area A
Illustration 3 g01415185
Left side view of the engine (7) Front face of the cylinder blockNote: Install one cable strap (4) for each valve cover that is shown in Illustration 3. Strap the harness assembly to support rod (5) . (4) Locate tiewrap strap head on the back side of the clip (6) that is shown in Illustration 2 in order to tighten the cable strap. (5) Remove all the labels from support rod and harness assembly before installation.