GEAR AS 1329626 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 1Q4607 SHOE-TRK MASTER (As required)
1 1Q4728 SHOE-TRACK (As required)
1 1Q4729 SHOE-TRK MASTER (As required)
1 1Q4973 SHOE-TRACK (As required)
1 1S1860 NUT-TRACK (As required)
1 6V1792 BOLT-TRACK (As required)
1 1571373 SHOE-TRACK (As required)
1 1571374 SHOE-TRK MASTER (As required)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 20% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Participation is limited to 4000 part hours, 100% link wear, or 4 part years, whichever comes first.
If any hardware is found loose or missing, then replace all hardware on that shoe. The shoe should also be replaced if its bolt holes or abutment surfaces are damaged. Clean the abutment surfaces and apply lubricant to the threads prior to installation. Pre-tighten each bolt to 400 N-m, followed by a turn of 120 degrees.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
During pin and bushing turn, replacement of all bolts and nuts is covered. No labor is provided during turn time.
When failures occur in the field, 1/2 hour of labor is covered per shoe.
Shoe replacement will be covered if bolt holes or abutment surfaces are damaged or if the shoe is missing.
If there has been a previous repair or replacement, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.