1484568 GEAR & BEARING GP Caterpillar parts
315, 315B, 315B L, 315C, 317, 317B LN, 318B, OEMS
Rating:
Alternative (cross code) number:
CA1484568
148-4568
1484568
CA1484568
148-4568
1484568
Weight: 492 pounds 223 kg.
EXCAVATOR, UNDERCARRIAGE,
This part in 2 request:
Show.
This information for suppliers only!
2019-05-14
2017-04-12
Compatible equipment models: 1484568:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00990748
Disconnect the harness assembly (1).
Remove the setscrew (2).
Carefully remove the speed/timing sensor (3) from the cylinder block. Do not pry out the speed/timing sensor.
Remove the O-ring seal from the speed/timing sensor. Discard the O-ring seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00990801
Install a new O-ring seal (4) in the first groove on the speed/timing sensor (3). Lubricate the O-ring seal with clean engine oil.
Position the speed/timing sensor (3) completely against the cylinder block. Align the hole in the bracket with the hole in the cylinder block. Note: Do not use the setscrew (2) to pull the speed/timing sensor into position against the cylinder block.
Install the setscrew (2). Tighten the setscrew to a torque of 22 N m (16 lb ft).
Connect the harness assembly (1).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00990748
Disconnect the harness assembly (1).
Remove the setscrew (2).
Carefully remove the speed/timing sensor (3) from the cylinder block. Do not pry out the speed/timing sensor.
Remove the O-ring seal from the speed/timing sensor. Discard the O-ring seal. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00990801
Install a new O-ring seal (4) in the first groove on the speed/timing sensor (3). Lubricate the O-ring seal with clean engine oil.
Position the speed/timing sensor (3) completely against the cylinder block. Align the hole in the bracket with the hole in the cylinder block. Note: Do not use the setscrew (2) to pull the speed/timing sensor into position against the cylinder block.
Install the setscrew (2). Tighten the setscrew to a torque of 22 N m (16 lb ft).
Connect the harness assembly (1).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 330, 330 FM L, 330 L, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
330B, 330B L, OEMS
330B, 330B L, OEMS
330, 330 FM L, 330 L, 330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, OEMS
330C, 345B, 345B II, 345B II MH, 345B L, 350, OEMS
8E7895
GEAR GP-BEVEL & TRANSFER
D4H XL, D4HTSK III
D4H XL, D4HTSK III
1994596
GEAR & BEARING GP-SWING
322C, 322C FM
322C, 322C FM
6I8280
GEAR GP-OUTPUT
IT14B
IT14B
6C5172
GEAR GP-BEVEL
918F, IT18F
918F, IT18F
3447155
GEAR GP-SPEED SENSOR
770G, 770G OEM, 772G, 772G OEM, 777G
770G, 770G OEM, 772G, 772G OEM, 777G
2259556
GEAR GP-REAR
C11, C13, CX31-C13I, RM-300, TH35-C11I, TH35-C13I
C11, C13, CX31-C13I, RM-300, TH35-C11I, TH35-C13I
3772394
GEAR GP-FRONT
G3516H
G3516H
9Y5003
GEAR GP-FRONT
206, 212, 416, 426, 428, 436, 438, AP-800, CB-424, CP-433B, CS-323, CS-431B, PR-75, PS-110, PS-130, PS-180, RT50, WE-601B
206, 212, 416, 426, 428, 436, 438, AP-800, CB-424, CP-433B, CS-323, CS-431B, PR-75, PS-110, PS-130, PS-180, RT50, WE-601B
2579937
GEAR GP-BEVEL & PINION
924H, 924HZ
924H, 924HZ