GEAR-SUN 1517484 - Caterpillar

Illustration 1 g02559957
Typical example
Table 1
Item Qty Part Specification Description
1 1 - The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
2 1 8E-6792 Track Roller Bearing Inside diameter after assembly is 47.63 0.09 mm (1.875 0.004 inch).
3 1 8E-6793 Track Roller Bearing Inside diameter after assembly is 47.63 0.09 mm (1.875 0.004 inch).
A - - End play:
Minimum is 0.25 mm (0.010 inch).
Maximum is 0.75 mm (0.029 inch).
4 1 - Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed.
B 1 8E-5601 Track Roller Shaft Assembly Length of the track roller shaft assembly that must be free of paint before assembly is 55 5 mm (2.17 0.2 inch).