GEAR 1572090 - Caterpillar

Remove bearing (43) .
Illustration 21 g01112593
Remove stator (44) .
Illustration 22 g01112597
Use Tooling (B) to remove retaining ring (45). Remove race (46) from stator (44) .
Illustration 23 g01112618
Remove inner race (49), rollers (48), and springs (47) from stator (44) .
Illustration 24 g01112623
Use Tooling (B) to remove retaining ring (50). Remove race (51) from stator (44) .
Illustration 25 g01112624
If necessary, raise the temperature of stator (44) to push cam (52) from stator (44) .
Illustration 26 g01117164
Illustration 27 g01112627
Remove bearing (53) to remove race (54) and retainer (55) .
Illustration 28 g01117157
Use Tooling (C) to remove retaining ring (57). Remove turbine (56) .
Illustration 29 g01112633
Remove bolts (58) and the washers. Remove hub (57A) from turbine (56) .
Illustration 30 g01112634
Illustration 31 g01112637
Use a suitable press to remove flange (61) with ring gear (59) from the torque divider.
Use a suitable hammer and a suitable punch to drive pins (60) into flange (61). Compress retaining ring (62) and remove ring gear (59) from flange (61). Remove pins (60) and retaining ring (62) from flange (61) .
Illustration 32 g01112639
Illustration 33 g01112641
Remove seal ring (64) from seal carrier (63) .
Install three of Tooling (G) to remove seal carrier (63) from flange (61) .
Illustration 34 g01112642
Inspect bearings (65). If bearings (65) are worn or damaged, use Tooling (D) to remove bearings (65) from flange (61) .
Illustration 35 g01112645
Use Tooling (B) to remove retaining ring (66). Use a suitable press to remove bearing (68) and sleeve (67) .