1614233 GEAR-SPUR Caterpillar parts
735
Rating:
Alternative (cross code) number:
CA1614233
161-4233
1614233
CA1614233
161-4233
1614233
ARTICULATED TRUCK,
Compatible equipment models: 1614233:
Number on catalog scheme:
48
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
If the engine is equipped with a fan, remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Illustration 1 g01992013
Remove the front seal from the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Remove bolts (3) and bolts (4) . Identify the positions of bolts of different length.
Remove front cover (1) from the front housing.
Remove gasket (2) from front cover (1) .Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M8 by 70 mm 2
B 367-3535 Front Cover Alignment Tool 1
Illustration 2 g02190133
Thoroughly clean the gasket surface of the front housing.
If the original front cover is installed, follow Step 2.a through Step 2.b.
Thoroughly clean front cover (1) .
Install a new gasket (2) to front cover (1) . Engage Locators (Y) into the holes in the front cover.
Install Tooling (A) into Holes (X) in the front housing.
Use Tooling (A) in order to position the front cover assembly onto the front housing.
Install bolts (3) and bolts (4) finger tight. Ensure that the bolts of different length are installed in the correct positions.
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Use Tooling (B) in order to align the front cover.
Remove Tooling (A) and install remaining bolts (4) .
Tighten bolts (3) and bolts (4) to a torque of 22 N m (195 lb in).
Remove Tooling (B) from the front cover.End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Install" for the correct procedure.
If the engine was equipped with a fan, install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove" for the correct procedure.
If the engine is equipped with a fan, remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Illustration 1 g01992013
Remove the front seal from the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Remove bolts (3) and bolts (4) . Identify the positions of bolts of different length.
Remove front cover (1) from the front housing.
Remove gasket (2) from front cover (1) .Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M8 by 70 mm 2
B 367-3535 Front Cover Alignment Tool 1
Illustration 2 g02190133
Thoroughly clean the gasket surface of the front housing.
If the original front cover is installed, follow Step 2.a through Step 2.b.
Thoroughly clean front cover (1) .
Install a new gasket (2) to front cover (1) . Engage Locators (Y) into the holes in the front cover.
Install Tooling (A) into Holes (X) in the front housing.
Use Tooling (A) in order to position the front cover assembly onto the front housing.
Install bolts (3) and bolts (4) finger tight. Ensure that the bolts of different length are installed in the correct positions.
Install a new front seal to the front cover. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove and Install" for the correct procedure.
Use Tooling (B) in order to align the front cover.
Remove Tooling (A) and install remaining bolts (4) .
Tighten bolts (3) and bolts (4) to a torque of 22 N m (195 lb in).
Remove Tooling (B) from the front cover.End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Install" for the correct procedure.
If the engine was equipped with a fan, install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
140H, 14H, 14M, 16G, 16H, 16H NA, 16M, 245, 24H, 24M, 2864C, 3176, 3176B, 3176C, 3196, 3304B, 3306B, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336...
365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 735, 735B, 740, 740B, C15, C15 I6, C18, C18 I6, CX31-C15I, D9T, TH35-C15I, TH35-C15T
735, 735B, 740, 740B, C-16, D350E II, D400E II, D8N, D8R, D8R II, RM-350B, SM-350
735, 735B, 740, 740B, C-16, D350E II, D400E II, D8N, D8R, D8R II, PM-465, RM-350B, SM-350
735, 735B, 740, 740B, C-16, D350E II, D400E II, D8N, D8R, D8R II, PM-465, RM-350B, SM-350
572R, 572R II, 578, 583R, 631C, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 657E, 657G, 69D, 735, 735B, 740, 740B, 768C, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772B, 772G, 772G OEM, 773B, ...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14H NA, 14M, 160H, 160H ES, 160H...
611, 615, 615C, 735, 735B, 740, 740B, 816B, 966G, D25D, D400E, D400E II, D40D, R1600, R1600G, R1600H
611, 615C, 735, 735B, 740, 740B, 816B, 966G, D25D, D400E, D400E II, D40D
611, 615C, 735, 735B, 740, 740B, 966G, D400E, D400E II
528B, 530B, 735, 814B, 815B, 816B, 966D, 966F, D25C, D25D, D30C, D350C, D350E, D350E II, D35C, D35HP, D400
528B, 530B, 735, 814B, 815B, 816B, 966F, D25D, D350E, D350E II, D40D
1689029
GEAR AS
735, 735B, 740, 740B
735, 735B, 740, 740B
1477379
GEAR
735, 735B, 740, 740B
735, 735B, 740, 740B
735, 735B, 740, 740B
1614239
GEAR AS
735
735