GEAR & BEARING GP-SWING 1644298 - Caterpillar

Front Window (If Equipped)
Illustration 1 g02050493
(1) Lever
(2) Handle The front window serves as an alternate exit.In order to remove the front window, move lever (1) to the right. Grab handles (2) and lift the window into the overhead storage position. Exit through the front window.Right Side Window
Illustration 2 g02050942
(3) Hammer (If Equipped)
Alternate Exit - The right side window serves as an alternate exit.
Break Glass - Perform the following procedure in order to exit through the right side window. Hammer (3) is mounted near the rear window of the cab. Strike the right side window with the hammer in order to break the glass. Climb through the opening of the right side window in order to exit the cab.Roof Hatch (If Equipped)
Illustration 3 g02851621
(4) Latch
(5) Grip
(6) Gas springs
(7) Lock mechanism Note: Before operating the machine, make sure lock mechanism (7) (if equipped) is unlocked.
Alternate Exit - The roof hatch serves as an alternate exit. Slide the visor cover back. If equipped, make sure lock mechanism (7) is unlocked. Release latch (4). Hold grip (5) and push the roof hatch outward.
Illustration 4 g02901996If equipped with gas springs (6), press gas spring release (9) and remove gas spring shaft (8) in order to open hatch wider. Exit through the roof hatch.Removing the Roof Hatch from the Outside
Illustration 5 g02851583
(10) Hinge pin release If equipped with hinge pin release (10), the roof hatch can also be removed from the outside of the cab.Press hinge pin release (10) and slide backward. The hinge pin should detach and allow the hatch to be lifted. Exit through the roof hatch.Note: Lock mechanism (7) (if equipped) must be unlocked in order to allow the hatch to be lifted.Roof Hatch (If Equipped)
Illustration 6 g02851579
Alternate Exit - The roof hatch serves as an alternate exit. Slide the visor cover back. Remove knobs (11) and push the roof hatch outward. Exit through the roof hatch.Note: Do not open the hatch during general operation in order to maintain the functionality of the alternate exit.FOGS (If Equipped)
Note: Some FOGS are fixed/bolted-on and others can be opened. This information pertains to FOGS that can be opened.Top FOGS
Illustration 7 g02902217In order to exit through the roof hatch, the FOGS guard is equipped with a release latch. Open the roof hatch as stated above. As the roof hatch is being pushed outward, the roof hatch will hit lever (12). Lever (12) will allow the FOGS to lift upward. Exit through the roof hatch.In order to open the top FOGS from the outside of the machine, reach under the FOGS and pull up on release lever (12). Follow the directions for removing the hatch from the outside.Front FOGS
Illustration 8 g02902219In order to exit through the front window, the FOGS guard is equipped with a release latch. Open the front window as stated above and remove the lower window. Press down on levers (13) in order to open the front FOGS. Exit through the front window.