GEAR-SUN 1920815 - Caterpillar

Illustration 8 g01208208
Remove bolts (9) from each side of the operator console. Pull hose assemblies (3) and (4) through the floor of the cab. Hose assemblies (3) and (4) were removed in Steps 3 and 4. Pull harness assemblies (5) and (6) through the floor of the cab. Harness assemblies (5) and (6) were removed in Steps 5 and 6. Note: If the machine is equipped with a radio, the antenna will need to be disconnected.
Illustration 9 g01208250
Disconnect harness assembly (10).
Illustration 10 g01208252
Remove bolts (11) and operator console (12). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Illustration 11 g01208252
Install operator console (12) and bolts (11).
Illustration 12 g01208250
Connect harness assembly (10).
Illustration 13 g01208208
Insert hose assemblies (3) and (4) through the hole in the cab floor. Insert harness assemblies (5) and (6) through the holes in the cab floor. Hose assemblies (3) and (4) and harness assemblies (5) and (6) will be connected in the following steps. Install bolts (9) from each side of the operator console. Note: If the machine is equipped with a radio, the antenna will need to be connected.
Illustration 14 g01208204
Move floor mat (7) toward the rear of the cab. Install plate (8).
Illustration 15 g01208202
Connect harness assemblies (6).
Illustration 16 g01208198
Connect harness assemblies (5).
Illustration 17 g01208191
Connect hose assemblies (4).
Illustration 18 g01208182
Connect hose assemblies (3).
Illustration 19 g01196137
Remove Tooling (A).
Illustration 20 g01208165
Install plates (1) and (2). End By:
Install the seat. Refer to Disassembly and Assembly, "Seat - Install".