GEAR & BEARING GP-SWING 1994471 - Caterpillar

Illustration 1 g00791946
(1) Engine (2) Torque converter (3) Transmission planetary (4) Wheel and final drive (5) Differential and bevel gear (6) Output transfer gears and case (7) Drive shaft (8) Through hitch drive shaft (9) Drive shaft (10) Differential and bevel gear (11) Drive shaft (12) Differential and bevel gear (13) Wheel and final drive (14) Wheel and final drive (15) Differential (16) Front drive shaft (17) Main drive shaftTractor Arrangement
The engine flywheel drives torque converter (2). The torque converter has an integral lockup clutch. The lockup clutch for the torque converter allows the machine to operate in torque converter drive or in direct drive.Torque converter (2) is located within the housing for the transmission planetary which is bolted directly to the engine. Transmission planetary (3) contains seven hydraulically actuated clutches. The seven hydraulically actuated clutches give seven forward speeds and one reverse speed.Main drive shaft (17) transmits torque to output transfer gears and case (6). Differential (15) is located in output transfer gears and case (6), which is connected to front drive shaft (16) and drive shaft (7). Front drive shaft (16) is connected to differential and bevel gear (5). Drive shaft (7) is connected hitch drive shaft (8) .Differential and bevel gear (5) transfers drive to wheel and final drives (4) for the front axle.Trailer Arrangement
Through hitch drive shaft (8) transmits torque to drive shaft (9). The drive shaft transfers drive to differential and bevel gear (10) .Differential and bevel gear (10) transfers drive to wheel and final drives (14) for the center axle and drive shaft (11) .Drive shaft (11) transmits torque to differential and bevel gear (12) .Differential and bevel gear (12) transfers drive to wheel and final drives (13) for the rear axle.