1994483 GEAR & BEARING GP-SWING Caterpillar parts
325B, 325B L, M325B
Rating:
Alternative (cross code) number:
CA1994483
199-4483
1994483
CA1994483
199-4483
1994483
Weight: 920 pounds 417 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Illustration 1 g02160936
Slide locking tab (3) into the unlocked position. Disconnect harness assembly (2). Slide connection for harness assembly (2) from the bracket (4).
Remove hose from inlet connection (1).
Remove inlet manifold connection (1). Refer to Disassembly and Assembly, "Throttle Valve (Intake air) - Remove" for the correct procedure.
Illustration 2 g02162574
Remove allen head bolts (5). Make temporary mark on wastegate solenoid (6) for installation purposes. Remove wastegate solenoid (6) from inlet manifold connection (1). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3975 Rubber Lubricant 1
Ensure that all components of wastegate solenoid are clean and free from wear and damage. If necessary, replace the wastegate solenoid as an assembly if any of components are worn or damaged.
Illustration 3 g02161575
Ensure that O-ring seal (7), O-ring seal (8), and O-ring seal (9) on wastegate solenoid (6) are free from damage and wear.
If the O-ring seals are damaged or worn, the wastegate solenoid should be replaced as an assembly.
Ensure that the ports in Position (X) are clean and free from restriction.
Use Tooling (A) in order to lubricate O-ring seal (7), O-ring seal (8), and O-ring seal (9) on wastegate solenoid (6).
Illustration 4 g02162574
Install wastegate solenoid (6) to inlet manifold connection (1). Note: Ensure that the wastegate solenoid is correctly orientated.
Install allen head bolts (5) to wastegate solenoid (6). Tighten allen head bolts (5) to a torque of 9 N m (80 lb in).
Install inlet manifold connection (1). Refer to Disassembly and Assembly, "Throttle Valve (Intake air) - Install" for the correct procedure.
Illustration 5 g02160936
Slide the connection for harness assembly (2) onto bracket (4). Connect harness assembly (2). Slide locking tab (3) into the locked position.
Install the hose to inlet connection (1). Tighten the hose clamp securely.
Illustration 1 g02160936
Slide locking tab (3) into the unlocked position. Disconnect harness assembly (2). Slide connection for harness assembly (2) from the bracket (4).
Remove hose from inlet connection (1).
Remove inlet manifold connection (1). Refer to Disassembly and Assembly, "Throttle Valve (Intake air) - Remove" for the correct procedure.
Illustration 2 g02162574
Remove allen head bolts (5). Make temporary mark on wastegate solenoid (6) for installation purposes. Remove wastegate solenoid (6) from inlet manifold connection (1). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3975 Rubber Lubricant 1
Ensure that all components of wastegate solenoid are clean and free from wear and damage. If necessary, replace the wastegate solenoid as an assembly if any of components are worn or damaged.
Illustration 3 g02161575
Ensure that O-ring seal (7), O-ring seal (8), and O-ring seal (9) on wastegate solenoid (6) are free from damage and wear.
If the O-ring seals are damaged or worn, the wastegate solenoid should be replaced as an assembly.
Ensure that the ports in Position (X) are clean and free from restriction.
Use Tooling (A) in order to lubricate O-ring seal (7), O-ring seal (8), and O-ring seal (9) on wastegate solenoid (6).
Illustration 4 g02162574
Install wastegate solenoid (6) to inlet manifold connection (1). Note: Ensure that the wastegate solenoid is correctly orientated.
Install allen head bolts (5) to wastegate solenoid (6). Tighten allen head bolts (5) to a torque of 9 N m (80 lb in).
Install inlet manifold connection (1). Refer to Disassembly and Assembly, "Throttle Valve (Intake air) - Install" for the correct procedure.
Illustration 5 g02160936
Slide the connection for harness assembly (2) onto bracket (4). Connect harness assembly (2). Slide locking tab (3) into the locked position.
Install the hose to inlet connection (1). Tighten the hose clamp securely.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325...
322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 34...
322 FM L, 322B L, 322B LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL, M32...
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
320B, 322B L, 325 L, 325B, 325B L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, OEMS
320B, 322B L, 325, 325 L, 325 LN, 325B, 325B L, OEMS
8E6666
GEAR GP-TRANSFER
611, 615C
611, 615C
2175688
GEAR GP-REAR
844H, 990H
844H, 990H
2367495
GEAR GP-BEVEL & PINION
928H, 928HZ, 930G, IT28G
928H, 928HZ, 930G, IT28G
2942655
GEAR & CASE GP-TRANSFER
AD55B, AD60
AD55B, AD60
3648516
GEAR GP-REAR
770G, 770G OEM, 772G, 772G OEM
770G, 770G OEM, 772G, 772G OEM
3649106
GEAR GP-REAR
770G, 770G OEM, 772G, 772G OEM
770G, 770G OEM, 772G, 772G OEM
6I9486
GEAR GP-OUTPUT TRANSFER
966F II, 970F
966F II, 970F
1125675
GEAR GP-REAR
5230, 793B
5230, 793B
1125676
GEAR GP-REAR
5130, D11N, D11R
5130, D11N, D11R
3530649
GEAR & BEARING GP-SWING
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L
324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 326D L