1994647 GEAR & BEARING GP-SWING Caterpillar parts
318C, 319C
Rating:
Alternative (cross code) number:
CA1994647
199-4647
1994647
CA1994647
199-4647
1994647
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
2.1 Introduction
This chapter contains a description of the propel gear GFT 60 T3 9139. The description is supplemented by information on the scope of supply, a list of technical data and details of operating media.Description
The planetary gearbox HYDROTRAC GFT 60 T3 9139 is of 3-stage design complete with an integrated, hydraulically released multi-plate parking brake and a disconnect mechanism.A REXROTH plug-in motor is mounted directly to the gearbox.To ensure an optimum balancing of loads, each planetary stage comprises of planet gears in sets. The externally toothed wheels are case-hardened.The gearbox runs in antifriction bearing exclusively and has a splash lubrication system.A special mechanical seal reliably protects the tumbler bearing system against the ingress of dirt and dust.The gearbox is exclusively intended for use as propel drive in a undercarrier.L+S shall not be liable for any damage arising as a result of the gearbox being used for purposes other than originally intended. In such a case, the risk lies solely with the User.2.3 Description of Brake
The hydraulically released, multi-plate brake, integrated in the gearbox, is a parking brake. It is normally closed by spring force and released when pressurized by hydraulic oil.2.4 Scope of Supply
The supply scope includes:- Gearbox with integrated multiple disk holding brake.- REXROTH fixed displacement plug in motor.- Technical documentation.Means of protection against accidental contact with rotating parts as prescribed by statutory provisions do not form part of the supply scope.Please check all equipment supplies for completeness immediately upon receipt. Any deviations and transit damage must be reported to L+S right away. A written conformation of such a report is also required.2.5 Technical Data
2.6 Drawings and Lists
2.7 Operating Media
The list of recommended lube oils given in Appendix B shall be observed.
This chapter contains a description of the propel gear GFT 60 T3 9139. The description is supplemented by information on the scope of supply, a list of technical data and details of operating media.Description
The planetary gearbox HYDROTRAC GFT 60 T3 9139 is of 3-stage design complete with an integrated, hydraulically released multi-plate parking brake and a disconnect mechanism.A REXROTH plug-in motor is mounted directly to the gearbox.To ensure an optimum balancing of loads, each planetary stage comprises of planet gears in sets. The externally toothed wheels are case-hardened.The gearbox runs in antifriction bearing exclusively and has a splash lubrication system.A special mechanical seal reliably protects the tumbler bearing system against the ingress of dirt and dust.The gearbox is exclusively intended for use as propel drive in a undercarrier.L+S shall not be liable for any damage arising as a result of the gearbox being used for purposes other than originally intended. In such a case, the risk lies solely with the User.2.3 Description of Brake
The hydraulically released, multi-plate brake, integrated in the gearbox, is a parking brake. It is normally closed by spring force and released when pressurized by hydraulic oil.2.4 Scope of Supply
The supply scope includes:- Gearbox with integrated multiple disk holding brake.- REXROTH fixed displacement plug in motor.- Technical documentation.Means of protection against accidental contact with rotating parts as prescribed by statutory provisions do not form part of the supply scope.Please check all equipment supplies for completeness immediately upon receipt. Any deviations and transit damage must be reported to L+S right away. A written conformation of such a report is also required.2.5 Technical Data
2.6 Drawings and Lists
2.7 Operating Media
The list of recommended lube oils given in Appendix B shall be observed.
Caterpillar SIS machinery equipment:
Caterpillar SIS
318C L & 318C LN Excavators GPA00001-UP (MACHINE) POWERED BY 3066 Engine »
199-4647
GEAR & BEARING GP-SWING
318C Excavators BTG00001-UP (MACHINE) POWERED BY 3066 Engine »
199-4647
GEAR & BEARING GP-SWING
319C LN Hydraulic Excavator KGL00001-UP (MACHINE) POWERED BY 3066 Engine »
199-4647
GEAR & BEARING GP-SWING
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320...
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 3...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 3...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 3...
315C, 315D L, 318C, 318E L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR...
315C, 315D L, 318C, 318E L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
1994509
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C
2291079
GEAR & BEARING GP-SWING
314C, 314D CR, 314D LCR
314C, 314D CR, 314D LCR
2032762
GEAR GP-BEVEL & PINION
928H, 928HZ, IT28G
928H, 928HZ, IT28G
3462513
GEAR & CASE GP-TRANSFER
R1300G, R1300G II
R1300G, R1300G II
2276097
GEAR & BEARING GP-SWING
365B, 365B II, 365C, 365C L, 365C L MH
365B, 365B II, 365C, 365C L, 365C L MH
3936548
GEAR & BEARING GP-SWING
330C FM, 330D FM, 330D MH, 336D L, 340D L, 340D2 L, 568 FM LL
330C FM, 330D FM, 330D MH, 336D L, 340D L, 340D2 L, 568 FM LL
1994657
GEAR & BEARING GP-SWING
330C FM
330C FM
2276080
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C
2276079
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C