GEAR DRIVE 1T1286 - Caterpillar

Illustration 1 g06270048
Table 1
Specification for 378-9540 Swing Drive and Mounting Gp
Item Qty Part Specification Description
1 2 096-4755 Pin Before assembly, apply Loctite C5A Copper anti-seize to the pin.
2 30 509-7907 Bolt Before assembly, remove compound, oil and dust from female threads, then apply Loctite 243 to the threads.
Use the following tightening procedure:
1. Tighten bolts to 150 15 N m (111 11 lb ft).
2. Turn to an additional angle of 45 5 degrees.
3 - - Before assembly, apply 8C-8422 Sealant to the contact surfaces of the bolt, the washer, and the tightened parts must be clean and free of protective coating and oil.
4 2 5D-1026 Band Clamp Tighten clamps to 4.5 0.5 N m (39.8 4.4 lb in).