1T1631 GEAR-PUMP DRIVE Caterpillar parts
950B, 950B/950E, 950F
Rating:
Alternative (cross code) number:
CA1T1631
1T-1631
1T1631
CA1T1631
1T-1631
1T1631
Weight: 16 pounds 7 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$378.98
22 Jan 2024
US: Fast 404
1T1631 Gear-Pump Dr Fits CATERPILLARR Models 1T1631
BSlocator mpn: 1T1631
BSlocator mpn: 1T1631
$193.01
23 Feb 2019
Unknown: Unknown
Caterpillar 1T1631 Gear 86 T New
$201.60
18 May 2022
18.0[8.10] Pounds
US: ProperBuy
Caterpillar GEAR (1T1631) New Aftermarket By CTP
TCP Warranty
TCP Warranty
This part in 2 request:
Show.
This information for suppliers only!
2024-10-07
2024-10-07
Number on catalog scheme:
11
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tool
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3 Start By:
Remove the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lay the vibration damper flat. The plugs should face upward.
Illustration 1 g00556938
Remove the two plugs from cover (1).
Remove the two plugs from the center of case assembly (3). Allow the vibration damper to settle for 8 hours at room temperature.
Remove cover (1) and O-ring seals (4).
Illustration 2 g00556939
Attach Tooling (A). Use a suitable lifting device to remove weight (2). The weight of the weight is 122 kg (267 lb).
Thoroughly clean all parts. Inspect the parts for damage. If the nylon coating on weight (2) is damaged, the vibration damper must be replaced.
Table 1
Required Tool
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3 Start By:
Remove the vibration damper. Refer to Disassembly and Assembly, "Vibration Damper - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lay the vibration damper flat. The plugs should face upward.
Illustration 1 g00556938
Remove the two plugs from cover (1).
Remove the two plugs from the center of case assembly (3). Allow the vibration damper to settle for 8 hours at room temperature.
Remove cover (1) and O-ring seals (4).
Illustration 2 g00556939
Attach Tooling (A). Use a suitable lifting device to remove weight (2). The weight of the weight is 122 kg (267 lb).
Thoroughly clean all parts. Inspect the parts for damage. If the nylon coating on weight (2) is damaged, the vibration damper must be replaced.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962H
950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962H
950F, 950F II, 960F, R1300, R1300G
950B, 950B/950E, 950F
950F, 950F II
950F, 950F II
950F, 950F II
950F, 950F II
950F, 950F II, 960F
950B, 950B/950E, 966C
950B, 950B/950E, 966C, D25C, D30C, D350C, D35C, D35HP, D400
950B, D25C, D25D, D30C, D350C, D35C, D35HP, D400
950F, 950F II, 960F, R1300, R1300G
8R9305
GEAR-DIFFERENTIAL BEVEL
950F, 950F II, 960F
950F, 950F II, 960F
950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962H
950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962H
966D, 966F
814B, 815B, 966D, 966F
824C, 980F, 980F II, R1700 II
3T6179
GEAR
834B, 980C, 980F, D44B, D550B
834B, 980C, 980F, D44B, D550B
4E7512
GEAR-DIFFERENTIAL BEVEL
980F, 980F II
980F, 980F II
824C, 825C, 826C, 980C, 980F, R1700 II
4E9966
GEAR-BEVEL
980F, 980F II, R1700 II
980F, 980F II, R1700 II
950B, 950B/950E, 950F