GEAR GP-INPUT TRANSFER 2023114 - Caterpillar

Illustration 5 g00809642
Location of pressure taps (1) Clutch pressure for the all wheel drive (If equipped) (2) Pressure for speed clutch 1 (3) Reverse clutch pressure (4) Forward low pressure (5) Forward high pressure (6) Lube pressure (7) Regulated pump pressure (8) Pressure for speed clutch 2 (9) Pressure for speed clutch 3 Note: When the pressures are checked at high idle, the transmission will drive through the service brakes and the parking brakes when the transmission is in the low speed ranges. The clutch pressures at high idle should be taken while the wheels are raised off the ground.Note: In order to check the FIFTH SPEED FORWARD pressure, raise the rear wheels off the ground and disengage the all wheel drive (if equipped). In order for FIFTH SPEED FORWARD to engage, the ground speed of the machine must reach a preset speed.
Table 2
Test Pressure for the Transmission    
Gear     Reverse Clutch     Forward High Clutch     Forward Low Clutch     Speed clutch 1     Speed clutch 2     Speed clutch 3    
First gear forward at high idle            
1415 210 kPa (205 30 psi)    
1480 210 kPa (215 30 psi)            
First gear forward at low idle            
1310 210 kPa (190 30 psi)    
1380 210 kPa (200 30 psi)            
Second speed forward at high idle        
1415 210 kPa (205 30 psi)