GEAR AS-IDLER 2168348 - Caterpillar

26. Remove the No. 1 clutch springs (26).27. Remove No. 1 clutch discs and plates.28. Remove the No. 1 clutch ring gear (27).29. Remove the piston from clutch housing.30. Remove the seal rings from piston and housing. 31. Remove the No. 2 clutch springs (28), and the No. 1 and No. 2 clutch pins (29).32. Remove the No. 2 clutch discs and plates. 33. Push the retaining pins (32) into the carrier.34. Pull the retaining ring (31) together and remove the ring gear (33) for No. 1 and No. 2 carrier. Remove ring gear (34) for No. 2 clutch.35. Remove the piston (30) from No. 2 clutch housing. Remove the seal rings from piston and from housing. 36. Remove the No. 3 clutch springs (36). Remove the No. 3, 4, and 5 clutch pins (35).37. Remove the No. 3 clutch discs and plates.38. Install two 3/8"-16NC forged eyebolts, fasten a hoist and remove the No. 2 and No. 3 carrier, the No. 4 carrier, and the No. 3 clutch as a unit. 39. Remove the retaining ring (37). 40. Remove the No. 2 and No. 3 carrier (38) from the No. 3 clutch housing.41. Remove the No. 3 clutch ring gear (39).42. Disassemble the No. 2 and No. 3 carrier as follows: a) Push retaining pins (43) into shafts (42).b) Remove the six planet gears (41), six bearings (44), three shafts (42), and twelve washers (40).c) Remove the three pins (43) from shafts. d) Remove the fastening bolt from No. 1 and No. 2 sun gears (48).e) Remove the No. 1 and No. 2 sun gears.f) Remove the ring from retainer (46). Remove the retainer and bearing (47). Remove the bearing from retainer.g) Remove the seal ring (45) from carrier.h) Remove the two pins for retaining ring for No. 1 and No. 2 carrier from carrier. 43. Remove No. 3 clutch piston (49).44. Remove the seal rings from piston (49) and from clutch housing.45. Remove retaining ring (51).46. Remove the No. 3 clutch housing (50) from the No. 4 carrier.47. Remove retaining ring (52). Remove the bearing from No. 3 clutch housing.48. Disassemble No. 4 carrier as follows: a) Push the retaining pins (57) into the shafts (55).b) Remove the three planet gears (54), six washers (58), six bearings (56), and three shafts (55).c) Remove the three pins (57) from shafts.d) Remove seal ring (53) from carrier. 49. Remove the No. 4 clutch springs (59).50. Remove No. 4 clutch discs and plates. 51. Push the pins (63) into the carrier. Pull the retaining ring together and remove the No. 4 clutch ring gear (62).52. Remove the No. 4 clutch housing (61).53. Remove No. 4 clutch piston (60) from housing. Remove the seal rings from piston and housing.54. Remove No. 5 clutch springs, discs, and plate. 55. Remove the No. 5 clutch ring gear (65).56. Remove piston (64) from housing. Remove the seal ring from No. 5 clutch piston.57. Install two 3/8"-16NC forged eyebolts in No. 5 clutch