GEAR SET 2.2 2216020 - Caterpillar

Prepare the Machine
Move the machine to a flat level area that will support the weight of the machine.
Lower all implements to the ground.
Install frame lock into position.
Illustration 1 g03367242
Shut down the machine and lock out the machine. Attach a "Do Not Operate" warning tag or similar warning to the start switch or to the controls before attempting the installation procedure on the machine. These warning tags are available from your Cat dealer.Required Parts
Table 1
380-5964 Camera Display Gp    
Qty    Part Number    
2     259-4399 Bases    
1     270-3311 Clamp    
1     344-2733 Display Module Gp    
1     380-5963 Bracket As    
1     394-6930 Motor Harness As    
4     8T-3991 Screws    
2     3E-8020 Screws    
4     4B-4274 Washers    
10     7K-1181 Cable Straps    
4     7Y-7388 Screws    
4     9X-8256 Washers    Installation Procedure
Illustration 2 g03694849
(1) 344-2733 Display Module Gp (2) 259-4399 Base (3) 7Y-7388 Screws (4) 4B-4274 Washers
Attach base (2) to display module (1) using four screws (3) and four washers (4) .
Illustration 3 g03694890
(2) 259-4399 Base (5) 380-5963 Bracket As (6) 8T-3991 Screws
Attach base (2) to bracket assembly (5) using four screws (6) .
Illustration 4 g03694905
(2) 259-4399 Base (7) 270-3311 Clamp
Attach clamp (7) to bases (2). Loosen clamp (7) until the clamp fits over the bases.
Illustration 5 g03694917
(5) 380-5963 Bracket As (8) 3E-8020 Screws (9) 394-6930 Motor Harness As (10) 7K-1181 Cable Straps (11) Main cab harness (12) Monitor coaxial cable (13) Cab coaxial cable
Attach bracket (5) to the top of the cab using two screws (8) .
Connect harness (9) to harness (11) .
Connect cables (12) and (13) .
Route harness (9) next to main cab harness (11). Secure harness (9) to main cab harness (11) using six cable straps (10) .
Illustration 6 g03694924
(9) 394-6930 Motor Harness As (10) 7K-1181 Cable Straps
Connect harness (9) to the main cab harness connector C-C52.
Secure harness (9) to the main cab harness using four cable straps (10) .For further information refer to Special Instruction, REHS7242, "WAVS Generic Installation Guide for Certain Cat® Products".