GEAR-YM 2241303 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2551 Axle Removal Tool 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g00870292
Remove bolts (1) and cover (2).
Illustration 2 g00871054
Illustration 3 g00871057
Use Tooling (A) to remove outer axle (3). Use Tooling (A) to remove inner axle (4).Note: There are two axles on the left side of the machine and one axle on the right side of the machine.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A FT-2551 Axle Removal Tool 1
B 369–9451 Petro Gel Amber Grease 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 4 g06120222
Illustration 5 g06120218
Illustration 6 g06120210
Apply Tooling (B) at locations (X).Note: Remove all burrs from axles (4) before applying Tooling (B).
Illustration 7 g00871057
Illustration 8 g00871054
Use Tooling (A) to install inner axle (4). Use Tooling (A) to install outer axle (3).Note: There are two axles on the left side of the machine and one axle on the right side of the machine.
Illustration 9 g00870292
Install cover (2) and bolts (1).