GEAR-TRANSFER 2260931 - Caterpillar

Illustration 1 g02841080
Right side view
Illustration 2 g02557496
Front view
Table 1
Specification for 273-7582 Engine Oil Filter Gp and 286-5749 Engine Oil Filter Gp
Item Qty Part Specification Description
1 2 4F-8965 Bolt Use the following procedure in order to tighten the clamp bolts:
1. Snugly tighten the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow.
3. Tighten the clamp assembly to the tube.
2 4 0S-1571 Bolt
6 2 0S-1594 Bolt
3 2 237-7623 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
4 2 7N-7697 Plunger Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
5 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85 to 100 N (19.0 to 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
7 3 109-2332 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
8 3 7G-6713 Spring Length under test force is 57.2 mm (2.25 inch).
Test force is 109 5 N (26 1 lb).
Free length after test is 99.7 mm (3.93 inch).
9 3 1P-1367 Plunger Valve must move freely in bore.
During engine operation, valves must start to open at a pressure difference of 203 20 kPa (29 3 psi).
10 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
11 1 124-4273 Bypass Valve Valves must start to open at a pressure difference of 180 20 kPa (26 3 psi).
12 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).