2276080 GEAR & BEARING GP-SWING Caterpillar parts
318C, 319C
Rating:
Alternative (cross code) number:
CA2276080
227-6080
2276080
CA2276080
227-6080
2276080
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
4.1 Introduction
This chapter describes the installation of the gearboxes.The hydraulic motor has been mounted at the gearbox housing.
The preceding safety notes must be carefully observed.Carefully follow the instructions given on the installation drawing: 1/6140/5139/1.4.2 Mounting Work to be Performed
Secure the gearbox safely before removing the lifting straps or ropes.* Avoid heavy blows when mounting the equipment.
Make sure that axial forces are not exerted during mounting.* Make sure high compression forces do not act on the gearbox housing.* During this work observe installation drawing as well as pertinent data.Attach the gearbox to a crane.Lift the gear into the bogie frame.Tighten the screws using a torque wrench. The relevant tightening torques shall be taken from the frame drawing.Remove the lifting or ropes.Remove the plugs before connecting the hydraulic oil lines.
Make sure that no dirt or foreign bodies are allowed to enter the hydraulic system.* Connect the hydraulic motor.
The preceding safety notes of customer must be carefully observed.* Connect the multi-plate parking brake.
The multi-plate parking brake is a safety device of the gearbox.* Connect the brake release line after removing the plug (item 39).
Make sure that no dirt or foreign bodies are allowed to enter the brake release port.
Make sure that the brake release port is properly sealed.* Back pressure is not allowed in the brake release line.Check once again tight fit of all joining elements.
This chapter describes the installation of the gearboxes.The hydraulic motor has been mounted at the gearbox housing.
The preceding safety notes must be carefully observed.Carefully follow the instructions given on the installation drawing: 1/6140/5139/1.4.2 Mounting Work to be Performed
Secure the gearbox safely before removing the lifting straps or ropes.* Avoid heavy blows when mounting the equipment.
Make sure that axial forces are not exerted during mounting.* Make sure high compression forces do not act on the gearbox housing.* During this work observe installation drawing as well as pertinent data.Attach the gearbox to a crane.Lift the gear into the bogie frame.Tighten the screws using a torque wrench. The relevant tightening torques shall be taken from the frame drawing.Remove the lifting or ropes.Remove the plugs before connecting the hydraulic oil lines.
Make sure that no dirt or foreign bodies are allowed to enter the hydraulic system.* Connect the hydraulic motor.
The preceding safety notes of customer must be carefully observed.* Connect the multi-plate parking brake.
The multi-plate parking brake is a safety device of the gearbox.* Connect the brake release line after removing the plug (item 39).
Make sure that no dirt or foreign bodies are allowed to enter the brake release port.
Make sure that the brake release port is properly sealed.* Back pressure is not allowed in the brake release line.Check once again tight fit of all joining elements.
Caterpillar SIS machinery equipment:
Caterpillar SIS
318C L & 318C LN Excavators GPA00001-UP (MACHINE) POWERED BY 3066 Engine »
227-6080
GEAR & BEARING GP-SWING
318C Excavators BTG00001-UP (MACHINE) POWERED BY 3066 Engine »
227-6080
GEAR & BEARING GP-SWING
319C LN Hydraulic Excavator KGL00001-UP (MACHINE) POWERED BY 3066 Engine »
227-6080
GEAR & BEARING GP-SWING
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320...
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 3...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 3...
315C, 315D L, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 3...
315C, 315D L, 318C, 318E L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR...
315C, 315D L, 318C, 318E L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
318C, 318E L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320...
2276079
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C
1994647
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C
1994509
GEAR & BEARING GP-SWING
318C, 319C
318C, 319C
2291079
GEAR & BEARING GP-SWING
314C, 314D CR, 314D LCR
314C, 314D CR, 314D LCR
2503217
GEAR & CASE GP-TRANSFER
AD45B, AD55
AD45B, AD55
3462513
GEAR & CASE GP-TRANSFER
R1300G, R1300G II
R1300G, R1300G II
2276097
GEAR & BEARING GP-SWING
365B, 365B II, 365C, 365C L, 365C L MH
365B, 365B II, 365C, 365C L, 365C L MH
3936548
GEAR & BEARING GP-SWING
330C FM, 330D FM, 330D MH, 336D L, 340D L, 340D2 L, 568 FM LL
330C FM, 330D FM, 330D MH, 336D L, 340D L, 340D2 L, 568 FM LL
1994657
GEAR & BEARING GP-SWING
330C FM
330C FM