GEAR 2379068 - Caterpillar

Illustration 1 g02806516
Table 1
Specification for 334-3569 Hydraulic Hand Control Gp
Item Qty Part Specification Description
1 1 9R-1765 Top Cover Position the top cover so that the neutralizer switch is 12 5 degrees from the centerline of the cab.
2 2 3S-2093 Cable Strap Route the harness down the center of the lever assembly. Use cable straps to secure the harness over the back of the tower.
3 1 9R-1766 Bottom Cover Apply Loctite 414 in the groove of the bottom cover.
4 2 8T-9501 Screw Torque to 1.50 0.25 N m (13.28 2.21 lb in).
5 1 107-5591 Jam Nut Torque to 40 5 N m (30 4 lb ft).
6 1 352-8367 Plate Adjust the plate in order to allow pin assembly to rotate freely.
7 4 6V-7744 Locknut Torque to 25 5 N m (18 4 lb ft).
8 2 6V-7744 Locknut Torque to 30 7 N m (22 5 lb ft).
9 2 9X-2040 Screw Torque to 30 7 N m (22 5 lb ft)
10 6 8T-4133 Nut Torque to 20 5 N m (15 4 lb ft).