GEAR-PLANETARY 2632820 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Description     Quantity    
A     138-7573     Link Bracket     2    Note: The main control valve of this machine is two different valves. The valves are located in two different positions. The travel control valve of the main control valve is located on the hydraulic tank.
Illustration 1 g01146490
Top right view of the main control valve
Attach a suitable lifting device and Tooling (A) to each corner of the main control valve. Install main control valve (3). The weight of main control valve (3) is approximately 136 kg (300 lb). Install bolts (6) .
Connect tube assembly (5) to main control valve (3). Connect hose assemblies (4) to main control valve (3) .
Illustration 2 g01146466
Top left view of the main control valve
Connect hose assemblies (2) to the top of main control valve (3). Connect harness assemblies (1) from the top of main control valve (3) .
Fill the hydraulic oil tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".