GEAR-DIFFERENTIAL BEVEL 2659511 - Caterpillar

Illustration 1 g00818532
Top View of Pressure and Flow Compensator Valve
Illustration 2 g00801707
Section A-APressure compensation (cutoff pressure) ... 24000 500 kPa (3480.9 72.5 psi)Margin pressure setting ... 2400 150 kPa (348.1 21.8 psi)Turning the adjusting screw (1) clockwise increases margin pressure. Turning the adjusting screw counterclockwise decreases margin pressure. (2) Torque for the locknut ... 17 3 N m (12 2 lb ft) (3) Torque for the plug ... 79 4 N m (58 3 lb ft) (4) Torque for the plug ... 30.5 1.5 N m (22.40 1.10 lb ft) (5) Torque for the two plugs ... 30.5 1.5 N m (22.40 1.10 lb ft)Turning the adjusting screw (6) clockwise increases cutoff pressure. Turning the adjusting screw counterclockwise decreases cutoff pressure. (7) Torque for the locknut ... 17 3 N m (12 2 lb ft) (8) Torque for the plug ... 101.5 4.5 N m (75 3 lb ft) (9) 6E-4228 Cutoff Spring Free length after test ... 60.0 mm (2.36 inch) Outside diameter ... 22.5 mm (0.88 inch) Maximum standby pressure ... 3900 kPa (566 psi)