GEAR 2D7618 - Caterpillar

Illustration 1 g03723273
Table 1
Specifications for 211-6626 Gear Pump Gp
Item Qty Part Specification Description
- - - Rotation of the pump is clockwise when the pump is viewed from the drive end.
- - - Bench test requirements: SAE 10W oil must be stabilized at 66°C (151°F) before the test is performed.
- - - Assemble the shaft seals with the sealing member that is toward the bushing.
1 8 3E-4324 Stud Torque to 228 10 N m (168 7 lb ft)
Drive End
- - - Test at Full Speed
Output 428 L/min (113.1 US gpm)
Test pressure 690 kPa (100 psi)
Test speed of engine 1835 rpm
Test speed of pump 2015 rpm
Output 420 L/min (111.0 US gpm)
Test pressure 6900 kPa (1000 psi)
Test speed of engine 1835 rpm
Test speed of pump 2015 rpm
- - - Test at Half Speed
Output 211 L/min (55.7 US gpm)
Test pressure 690 kPa (100 psi)
Test speed of engine 918 rpm
Test speed of pump 1008 rpm
Output 195 L/min (51.5 US gpm)
Test pressure 6900 kPa (1000 psi)
Test speed of engine 918 rpm
Test speed of pump 1008 rpm
Cover End
- - - Test at Full Speed
Output 428 L/min (113.1 US gpm)
Test pressure 690 kPa (100 psi)
Test speed of engine 1835 rpm
Test speed of pump 2015 rpm
Output 420 L/min (111.0 US gpm)
Test pressure 6900 kPa (1000 psi)
Test speed of engine 1835 rpm
Test speed of pump 2015 rpm
- - - Test at Half Speed
Output 211 L/min (55.7 US gpm)
Test pressure 690 kPa (100 psi)
Test speed of engine 918 rpm
Test speed of pump 1008 rpm
Output 195 L/min (51.5 US gpm)
Test pressure 6900 kPa (1000 psi)
Test speed of engine 918 rpm
Test speed of pump 1008 rpm