GEAR (36 Teeth) 2J3575 - Caterpillar

Illustration 1 g06061756
Illustration 2 g06061772
Illustration 3 g06062306Universal Warning (1)These safety messages are on valve covers on each side of the engine.
Illustration 4 g01370904
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (2)These safety messages are on valve covers on each side of the engine.
Illustration 5 g01372256
Hot surface! Do not touch!
Hot Surface (3)These safety messages are on the oil cooler and crankcase cover.
Illustration 6 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
High Pressure (4)This warning message is on the high-pressure fuel pump. The messages are also on front of valve covers. A message is on front of the engine above the vibration damper guard.
Illustration 7 g01381180
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Acid Burn (5)The safety messages are on top of each EGR cooler on top of the engine.
Illustration 8 g01382725
Sulfuric Acid Burn Hazard may cause serious personal injury or death.The exhaust gas cooler may contain a small amount of sulfuric acid. The use of fuel with sulfur levels greater than 15 ppm may increase the amount of sulfuric acid formed. The sulfuric acid may spill from the cooler during service of the engine. The sulfuric acid will burn the eyes, skin and clothing on contact. Always wear the appropriate personal protective equipment (PPE) that is noted on a material safety data sheet (MSDS) for sulfuric acid. Always follow the directions for first aid that are noted on a material safety data sheet (MSDS) for sulfuric acid.