GEAR (43 teeth) 2P2902 - Caterpillar

Illustration 1 g00106806
(1) Plate (2) Clevis pin (3) Locking pin
Attach the plate (1). Use two clevis pins (2), and four locking pins (3) .
Illustration 2 g00106807
Attach cylinder braces to the boom cylinders. Cylinder braces are supplied for machines that are shipped into countries which observe the Italian Roading Homologation. There may be cylinder braces for the following cylinders.
Cylinders for the stub boom and for the fore boom
Cylinder for the one-piece boom
Bucket cylinder
Illustration 3 g00106808
(4) Cylinder brace (5) Reflective plate
Attach cylinder brace (4) to the bucket cylinder. Attach the front reflective plate (5) to the cylinder brace.
Illustration 4 g00106809
Attach a reflective plate to both sides of the bucket.
Illustration 5 g00106810
(6) Screws (7) Beacon
Loosen screws (6). Raise beacon (7 ) on the back of the cab. Tighten the screws (6) .
Illustration 6 g00106816
(8) Front beacon
Position front beacon (8) to an upright position.