GEAR IDLER 3154683 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0960 Grease 1
Illustration 1 g02430138
Attach a suitable lifting device to piston pump (2). The weight of piston pump (2) is approximately 70 kg (154 lb).
Apply Tooling (A) to the splines of piston pump (2). Install the O-ring seal, piston pump (2), and bolts (9).
Illustration 2 g02430137
Install hydraulic fitting (7) to piston pump (2).
Install hose assembly (6), the clamps, and the bolts to piston pump (2).
Install hose assembly (5), the clamps, and the bolts to piston pump (2).
Connect hose assembly (8) to hydraulic fitting (7).
Illustration 3 g02430136
Connect harness assemblies (3). Install harness assemblies (3) to the clips.
Connect hose assemblies (1) and (3) from piston pump (2). End By:
Install the piston pump (left drag conveyor and left auger conveyor). Refer to Disassembly and Assembly, "Piston Pump (Left Drag Conveyor and Left Auger Conveyor) - Install".
Install the piston pump (hydraulic generator). Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Generator) - Install".