3678346 GEAR & BEARING GP-SWING Caterpillar parts
330C L, 330D, 330D L, 336D, 336D L, 336D LN, 336D2
Rating:
Alternative (cross code) number:
CA3678346
367-8346
3678346
CA3678346
367-8346
3678346
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3678346:
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean all mating surfaces thoroughly.
Illustration 1 g01000873
Install a new gasket (3) on the front plate. Be sure that gasket (3) properly fits on the dowel pins.Note: Do not use sealant on the gasket.
Apply clean engine oil to the lip of the crankshaft front seal.Note: If a new crankshaft front seal needs to be installed, refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Position front housing (2) on the front of the cylinder block.
Install bolts (1) and tighten to a torque of 10 to 13 N m (7 to 10 lb ft).End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean all mating surfaces thoroughly.
Illustration 1 g01000873
Install a new gasket (3) on the front plate. Be sure that gasket (3) properly fits on the dowel pins.Note: Do not use sealant on the gasket.
Apply clean engine oil to the lip of the crankshaft front seal.Note: If a new crankshaft front seal needs to be installed, refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Position front housing (2) on the front of the cylinder block.
Install bolts (1) and tighten to a torque of 10 to 13 N m (7 to 10 lb ft).End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install".
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar SIS
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L OEM GGH00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L Excavator DGR00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L Excavator TMC00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine »
367-8346
GEAR & BEARING GP-SWING
330C & 330C L Excavators GKX00001-UP (MACHINE) POWERED BY C-9 Engine »
367-8346
GEAR & BEARING GP-SWING
330C L Excavator DKY00001-UP (MACHINE) POWERED BY C-9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L & 330D N Hydraulic Excavator GGE00001-UP (MACHINE) POWERED BY C-9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L Excavator MWP00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L Excavator T2Y00001-UP (MACHINE) POWERED BY C-9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D & 330D L Excavators EAH00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L Excavator HAS00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L Excavator LRM00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
330D L Excavator R2D00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator W3K00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator WET00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L & 336D LN Excavator KDJ00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D & 336D L Excavators JBT00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavators M4T00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D & 336D L Excavators PGW00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L & 336D LN Excavators MYG00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator PTB00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Excavator ZML00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D L Mobile Hydraulic Power Unit J6D00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 & 336D2 L Excavators TLY00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 & 336D2 L Excavators EFT00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 & 336D2 L Excavators WDC00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L Excavator ZCT00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 XE &336D2 LXE Excavators MFA00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L Excavator LAM00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 L Excavators GJA00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2, 336D2 L & 336D2 GC Excavators FAJ00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
336D2 XE & 336D2 LXE Excavators LBX00001-UP (MACHINE) POWERED BY C9 Engine »
367-8346
GEAR & BEARING GP-SWING
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 2290, 2390, 2391, 2491, 2590, 3176C, 3196, 330C, 330C FM, 330C L, 330C MH, 336E, 336E H,...
330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 385B, 385C, 3...
330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 385B, 385C, 3...
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, 511, 521, 522, 532, TK1051, W345B II
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325 L, 325C, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325C, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, OEMS
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN
1994620
GEAR & BEARING GP-SWING
330C, 330C MH
330C, 330C MH
215, 215B, 215C, 215D, 219D
902, 906, 908
1478082
GEAR GP-AUGER DRIVE
621F, 621G, 627F, 627G
621F, 621G, 627F, 627G
8E9090
GEAR GP-OUTPUT TRANSFER
950F, 950F II
950F, 950F II
9G0951
GEAR & CASE GP-TRANSFER
627E, 627F, 627G
627E, 627F, 627G
1095561
GEAR GP-BEVEL
12G, 130G, 140G, 160G
12G, 130G, 140G, 160G
9K1039
GEAR PUMP GROUP
980B, D25C, D350C, D35C, D35HP, D400
980B, D25C, D350C, D35C, D35HP, D400
7C4815
GEAR GP-REAR
1673C, 3306, 3306B, 3306C
1673C, 3306, 3306B, 3306C
3699363
GEAR GP-REAR
784C, 785, 785B, 785C, 785D, 789C
784C, 785, 785B, 785C, 785D, 789C