GEAR & BEARING GP-SWING 3789598 - Caterpillar

Illustration 1 g06265778
Top view
Table 1
Item Qty Part Specification Description
1 2 3J-9196 Jam Nut Torque to 70 15 N m (52 11 lb ft).
2 2 7E-6508 Cap As Torque to 2.50 0.25 N m (22.13 2.21 lb in).
Start tightening the retainer nuts of the cap assembly by hand so that the terminal studs are not cross threaded.
3 1 317-1121 Jam Nut Torque to 120 15 N m (89 11 lb ft).
4 1 5P-7530 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
5 2 334-1626 Bolt If the bolt is removed for service, apply black Loctite Gasket Maker to the threads.
Illustration 2 g06265780
Table 2
Item Qty Part Specification Description
8 1 234-2273 Rocker Arm Shaft Diameter is 45.000 0.013 mm (1.7717 0.0005 inch).
9 1 6J-2245 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
B - - Bore of the bushing in the injector rocker arm assembly (6) is 45.077 0.015 mm (1.7747 0.0006 inch).
C - - Bore of the bushing in the valve rocker arm assembly (7) is 45.077 0.015 mm (1.7747 0.0006 inch).