GEAR AS-PUMP 3847539 - Caterpillar

Machine Operating Temperature Range
The standard machine configuration is intended for use within an ambient temperature of −40 °C (−40 °F) to 50 °C (122 °F). Special configurations for different ambient temperatures may be available. Consult your Caterpillar dealer for additional information on special configurations of your machine.Limiting Conditions and Criteria
Limiting conditions are immediate issues with this machine that must be addressed prior to continuing operation.The Safety Section of the Operation and Maintenance Manual describes limiting condition criteria for replacing items such as safety messages, seat belt and mounting hardware, lines, tubes, hoses, battery cables and related parts, electrical wires, and repairing any fluid leak.The Maintenance Interval Schedule in the Operation and Maintenance Manual describes limiting condition criteria that require repair or replacement for items (if equipped) such as alarms, horns, braking system, steering system, and rollover protective structures.The Monitoring System (if equipped) described in the Operation Section of the Operation and Maintenance Manual provides information on limiting condition criteria, including a warning level that requires immediate shutdown of the machine.Machine Operation
Do not allow a companion to ride on the machine unless the companion is seated within the Rollover Protective Structure (ROPS) or Falling Object Protection Structure (FOPS) with the seat belt fastened. The companion must have the seat belt fastened while the machine is in operation. The operator of the machine is responsible for the safety of the companion. Personal injury or death may occur if the companion is not restrained and protected.
Only operate the machine while you are in the operator seat. The seat belt must be fastened while you operate the machine. Only operate the controls while the engine is running.If equipped with dry brakes, do not release the parking brake or attempt to move the machine before normal brake air pressure has been reached. Refer to Operation and Maintenance Manual, Engine and Machine Warm-Up for additional information.Before you move the machine, you must make sure that no one will be endangered.During warm-up, operate the machine slowly in an open area while you check for the proper operation of all controls and all protective devices.Do not allow riders on the machine unless the machine has the following equipment:
Additional seat
Additional seat belt
Roll over Protective Structure (ROPS)Note any needed repairs during machine operation. Report any needed repairs.When the truck is on an upward slope, avoid dumping the truck. The truck could tip backward.Avoid any conditions that can lead to the machine tipping. One or more of the tires not contacting the ground can lead to tipping. The machine can tip when you work on hills, on banks and on slopes. Also, the machine can tip or the tires can leave the ground when you cross ditches, ridges, or other unexpected obstacles at excessive speeds. Operating the machine in the conditions stated is considered abuse and can lead to severe frame damage.Improper tire size or type can lead to reduced performance. Check with your local Cat dealer to ensure the tires being used are appropriate for the machine.Avoid operating