GEAR-OIL PUMP 3863197 - Caterpillar

Illustration 1 g06091893
Table 1
Specification for 386-5800 Propel Pump and Mounting Gp
Item Qty Part Specification Description
1 2 096-4833 Bolt Torque to 6.7 1.0 N m (59.3 8.9 lb in).
2 8 5L-8894 Bolt Before assembly, apply blue Loctite 243 to threads.
3 1 352-8170 Flange Refer Illustration 1 in order to assemble flange to flywheel with center protruding section away from flywheel.
4 2 361-2657 Bolt Torque to 170 30 N m (125 22 lb ft).
Illustration 2 g06091895
Right-hand view
Table 2
Item Qty Part Specification Description
5 1 484-2129 Hub Before assembly, the pump shaft and inner diameter of the hub must be clean and free from oil film.
Use the following procedure to tighten the hub bolts:
1. Tighten the hub bolts in sequence 1-2-1-2 as shown in Illustration 2.
2. First torque to 28 2 N m (248 18 lb in).
3. Final torque to 55.0 2.0 N m (41.0 1.5 lb ft).
A - - Distance from the hub to the piston pump group is 53.8 mm (2.12 inch).