GEAR-WATER PUMP DRIVE 3N5500 - Caterpillar

Introduction
This procedure is to install the 460-7450 Warning Beacon Lighting Gp on the top of the cab.This feature indicates whether an operator is wearing a seat belt during machine operation. This feature is called an external seat indicator light. The external seat indicator light is only compatible with machines that have bundle 2015 machines and newer for Network Manager.Note: This kit is not compatible with machines equipped with roading packages or kits for Belgium, Germany (TUV and non-TUV), Italy, United Kingdom. and Japan.Required Parts
Table 1
Required Parts for 460-7450 Warning Beacon Lighting Gp
Item Qty Part Name Description
1 3 5C-8312 Nut
2 3 096-6166 Hard Washer
3 3 213-7315 Screw
4 1 355-7155 Signal Lamp Gp
5 1 460-7447 Plate
6(1) 1 7K-1181 Cable Strap
(1) Not included with 460-7450 Warning Beacon Lighting Gp.Installation Procedure of the Warning Beacon Lighting Group
Illustration 1 g03860158
(1) 5C-8312 Nut
(2) 096-6166 Hard Washer
(3) 213-7315 Screw
(4) 355-7155 Signal Lamp Gp
(5) 460-7447 Plate
Assemble the warning beacon lighting group . Attach signal lamp group (4) to plate (5) using three screws (3), three hard washers (2), and three nuts (1).
Illustration 2 g03860547
(A) 8T-4195 Bolt
(B) 7X-7729 Washer
Install warning beacon lighting group to the cab using two bolts (A) and two washers (B). Bolts (A) and washers (B) are already attached to the mounting bracket that is on the rear of the cab, just beneath the cab cover.
Connect the receptacle from the warning beacon lighting group to the plug on the cab wiring harness. The plug is secured to the cab wiring harness that is located on the outside of the cab, just beneath the cab cover.
Use one cable strap (6) in order to secure the plug from the cab wiring harness to the cab.