GEAR (48 teeth) 3P0708 - Caterpillar

Illustration 1 g03544117
Typical example
(1) Tighten the studs to the following torque. ... 18 N m (13 lb ft) (2) Tighten the nuts to the following torque. ... 44 N m (32 lb ft) (3) Tighten the bolt to the following torque. ... 18 N m (13 lb ft) (4) Actuator The maximum test pressure for the wastegate ... 112 kPa (16.2445 psi)The movement for the rod actuator ... 1 mm (0.0394 inch)
Table 1
Engine kW The pressure for the wastegate
106 - 90 170 kPa (25 psi)
90 - 74.5 151 kPa (22 psi)
74.5 - 55 136 kPa (20 psi) Note: On certain applications, the pressure for the wastegate is detailed in table 2.
Table 2
Engine kW The pressure for the wastegate
74.5 - 60 116 kPa (17 psi)
Illustration 2 g03544119
Typical example
(5) Tighten the bolt to the following torque. ... 9 N m (80 lb in) (6) Tighten the bolt to the following torque. ... 18 N m (13 lb ft) (7) Tighten the bolts to the following torque. ... 22 N m (16 lb ft)