3S4384 GEAR (10 Teeth-Idler) Caterpillar parts
518C, 528, 528B, 530B, 54, 735, 735B, 740, 740B, 941, 955K, 955L, D4E
Rating:
Alternative (cross code) number:
CA3S4384
3S-4384
3S4384
CA3S4384
3S-4384
3S4384
Weight: 0.79 pounds 0 kg.
ARTICULATED TRUCK, WINCH,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$48.28
20 Feb 2024
US: FinditParts Inc
3S4384 - GEAR AS-OIL PUMP fits Caterpillar (CAT)
BLUMAQ
BLUMAQ
$37.09
21 Mar 2023
US: Florida-Parts-Z
3S4384 - Gear AS-Oil Pump for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$37.09
27 Apr 2022
US: Florida-Parts-Z
3S4384 - Gear AS-Oil Pump for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 3S4384:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1592 Lifting Eye Assembly 2
B 8T-9022 Silicone Gasket - Start By:
Remove the crankshaft rear seal.
Remove the electric starting motor.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01008304
Remove bolts (1) that fasten the engine oil pan to flywheel housing (2).
Illustration 2 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Remove bolts (3). Remove the flywheel housing from the cylinder block.
Remove gasket (4) from the flywheel housing. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the flywheel housing and the rear face of the cylinder block.
Illustration 3 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Install gasket (4) on the dowel pins of the cylinder block. Apply Tooling (B) to the bottom of the gasket in order to fill the space at the cylinder block, the flywheel housing, and the engine oil pan.
Position flywheel housing (2) and install bolts (3).
Illustration 4 g00551652
Tighten the bolts, as follows:
In a numerical sequence, tighten Bolt 1 through Bolt 24 to a torque of 40 10 N m (30 7 lb ft).
In a numerical sequence, again tighten Bolt 1 through Bolt 9 to a torque of 135 20 N m (100 15 lb ft).
In a numerical sequence, again tighten Bolt 10 through Bolt 24 to a torque of 55 10 N m (40 7 lb ft).
Illustration 5 g01008304
Install bolts (1) that fasten the engine oil pan to flywheel housing (2).
Remove Tooling (A). End By:
Install the electric starting motor.
Install the crankshaft rear seal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1592 Lifting Eye Assembly 2
B 8T-9022 Silicone Gasket - Start By:
Remove the crankshaft rear seal.
Remove the electric starting motor.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01008304
Remove bolts (1) that fasten the engine oil pan to flywheel housing (2).
Illustration 2 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Remove bolts (3). Remove the flywheel housing from the cylinder block.
Remove gasket (4) from the flywheel housing. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the flywheel housing and the rear face of the cylinder block.
Illustration 3 g01058428
Install Tooling (A) and a suitable lifting device on flywheel housing (2). The weight of flywheel housing (2) is approximately 105 kg (230 lb).
Install gasket (4) on the dowel pins of the cylinder block. Apply Tooling (B) to the bottom of the gasket in order to fill the space at the cylinder block, the flywheel housing, and the engine oil pan.
Position flywheel housing (2) and install bolts (3).
Illustration 4 g00551652
Tighten the bolts, as follows:
In a numerical sequence, tighten Bolt 1 through Bolt 24 to a torque of 40 10 N m (30 7 lb ft).
In a numerical sequence, again tighten Bolt 1 through Bolt 9 to a torque of 135 20 N m (100 15 lb ft).
In a numerical sequence, again tighten Bolt 10 through Bolt 24 to a torque of 55 10 N m (40 7 lb ft).
Illustration 5 g01008304
Install bolts (1) that fasten the engine oil pan to flywheel housing (2).
Remove Tooling (A). End By:
Install the electric starting motor.
Install the crankshaft rear seal.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
518, 528, 613C, 613C II, 613G, 730, 730C, 814, 815, 950B, 950B/950E, 966C, D300E, D300E II, R1300, R1300G, R1300G II
518, 528, 613C, 613C II, 613G, 730, 730C, 950B, 950B/950E, D300E, D300E II, R1300, R1300G, R1300G II
611, 615, 615C, 735, 735B, 740, 740B, 816B, 966G, D25D, D400E, D400E II, D40D, R1600, R1600G, R1600H
611, 615C, 735, 735B, 740, 740B, 816B, 966G, D25D, D400E, D400E II, D40D
611, 615C, 735, 735B, 740, 740B, 966G, D400E, D400E II
528, 613, 613B, 814, 815, 966C
528, 814, 815, 966C
528B, 530B, 735, 814B, 815B, 816B, 966D, 966F, D25C, D25D, D30C, D350C, D350E, D350E II, D35C, D35HP, D400
528B, 530B, 735, 814B, 815B, 816B, 966F, D25D, D350E, D350E II, D40D
528B, 530B, 735, 815B, D350E II
518, 518C
518, 528
561B, 561C, D5, D5B
561B, 561C, 977D, D5
7S8657
GEAR (12 Teeth-Drive)
D5, D5B
D5, D5B
9M3719
GEAR
12E, 951B, 977H, D4D, D6C
12E, 951B, 977H, D4D, D6C
3S4493
GEAR (10 TEETH)
12E, D4D
12E, D4D
3S6309
GEAR (40 TEETH)
561B, 561C
561B, 561C
518, 528, 920, 930, 941, 951B, D4D
4S8705
GEAR ASSEM.
951B, D4D
951B, D4D
518, 528, 920, 930, 941, 951B, D4D
518, 528, 920, 930, 941, 951B, D4D, D4E
518, 920, 941, 951B, D4D