GEAR 3T0580 - Caterpillar

Table 1
Effective Serial Numbers    
S/N:HRA01477-UP    
S/N:PDN00161-UP    
S/N:RRA05604-UP    
S/N:GLS04199-UP    
S/N:LGK23644-UP    
S/N:PBZ00152-UP    The new 385-2664 Engine Harness As is a direct replacement for the existing 354-0048 Engine Harness As. Refer to Illustration 1 and Table 2 for the list of parts needed to install the new harness on the engine.Note: Only change to the new 385-2664 Engine Harness As if the present 354-0048 Engine Harness As fails.Note: Align the cable straps for the ladder clips with the center of the green and blue tape on the harness.Note: Ensure that all ladder clips, brackets, spacers, fir trees, and cable straps are assembled at the correct location and in the orientation shown in the illustration.
Illustration 1 g03362563
Note: All of the prefixes listed above will use the new 357-0524 Electronic Control Wiring Gp when replacing the existing 354-0048 Engine Harness As with the new 385-2664 Engine Harness As. Refer to Illustration 1 and Table 2.
Table 2
Parts Included in 357-0524 Electronic Control Wiring Gp    
Callout     Quantity     Part Number     Description    
1     12     3S-2093     Cable Strap    
2     2     206-1345     Cable Strap Fir tree    
3     1     288-1023     Support Bracket    
4     1     385-2664     Engine Harness As    
5     3     132-5789     Clip    
6     2     156-6175     Clip    
7     1     2Y-5829     Nut M10X1.5-THD    
8     1     352-3970     Clip    
9     1     4P-7428     Clip    
10     1     4P-7581     Clip    
11     1     4P-8134     Clip    
12     1     8M-2770     Clip - Loop    
13     1     9G-7101     Spacer    
14     1     3E-4353     Hard Washer    
15     1     5P-8245     Hard Washer    
16     1     6V-4249     Bolt M10X1.5X16-MM