GEAR-PLANETARY 3T9418 - Caterpillar

ECO mode - Push the button in order to select ECO mode. When ECO mode is selected, the indicator light will be illuminated. When ECO mode is selected, the machine will use the following RPM rules:
Maximum engine speed is 1900 RPM.
If the engine speed is greater than 1900 RPM when ECO mode is activated, the engine speed will be reduced to 1900 RPM.Tire Pressure System (23)(24)(25)
Tire Pressure Mode (23)
Tire Pressure Mode - Use the tire pressure mode button to enable and select the tire pressure mode.Push and hold the tire pressure mode button to enable the tire pressure system. When the machine is first started, there is a two minute delay before the system can be enabled. When the tire pressure system is enabled the machine defaults to manual mode. When the tire pressure system is activated the tire pressure can be controlled with the tire pressure increase and tire pressure decrease buttons.The following tire pressure modes are available:Manual - Press the tire pressure mode button until indicator light (C) is illuminated in order to select Manual mode. When the tire pressure increase or tire pressure decrease buttons are pressed in Manual mode, the current tire system pressure will be displayed on the monitoring system. Hold the tire pressure increase button in order to increase the tire pressure to the desired level. Hold the tire pressure decrease button in order to decrease the tire pressure to the desired level.Automatic - Press the tire pressure mode button until indicator light (A) is illuminated in order to select Automatic mode. When the tire pressure increase or tire pressure decrease buttons are pressed in Automatic mode, the current tire pressure set point will be displayed on the monitoring system. Hold the tire pressure increase button in order to increase the tire pressure set point to the desired level. Hold the tire pressure decrease button in order to decrease the tire pressure set point to the desired level. In Automatic mode the tire pressure system will automatically maintain the tire pressure at the desired set point.Off - When the tire pressure system is activated, press and hold the tire pressure mode button for two seconds in order to disable the tire pressure system.Tire Pressure Increase (24)
Press and hold the button in order to increase the tire pressure.Tire Pressure Decrease (25)
Press and hold the button in order to decrease the tire pressure.Edge Cutter Raise (26)
Press the button in order to raise the edge cutter.Edge Cutter Lower (27)
Press the button in order to lower the edge cutter.Emulsion Spray (28)
The following modes are available for the emulsion spray system:
Manual
Auto 1
Auto 2
Auto 3Refer to Operation and Maintenance Manual, "Monitoring System" for instructions on how to change the emulsion spray mode.When the emulsion spray system is in Manual mode, hold the button in order to activate the emulsion spray.