GEAR-RING 3T9432 - Caterpillar

Illustration 13 g00822325
Disconnect electrical connector (29) .
Illustration 14 g00822333
Remove the bolt and clamp (30) from the two hose assemblies.
Illustration 15 g00822338
Disconnect electrical connector (31) .
Illustration 16 g00822395
Disconnect two hose assemblies (32) .
Disconnect electrical connector (33) .
Illustration 17 g00822399
Remove bolt (34) .
Illustration 18 g00822401
Loosen bolt (36) and move refrigerant compressor (35) toward the engine. Remove belt (37) from refrigerant compressor (35). Place the refrigerant compressor away from the engine.
Illustration 19 g00822417
Disconnect two electrical wires (38) from the alternator.
Illustration 20 g00822421
Remove electrical wires (39) from the starting motor.
Illustration 21 g00822614
Move hose away from two brackets (40). Repeat this step for the hoses and brackets on the other side of the engine.
Illustration 22 g00822622
Disconnect two electrical connectors (42) and (44) .
Remove sensor (43) .
Disconnect two hose assemblies (41) and (45) .
Illustration 23 g00822627
Disconnect coolant line (46) .
Illustration 24 g00822658
Disconnect all hose assemblies (47) from the power train pump.
Illustration 25 g00822681
Disconnect all hose assemblies (48) from the power train motor.
Disconnect any wire connectors (49), as required.
Move the wire harnesses away from the engine and pumps.
Remove any additional clips which may hold hoses or wires to the engine and pumps. Remove any tie-wraps which hold wires to the engine and pumps.
Illustration 26 g00822710
Remove four bolts (50) and the washers which hold the engine mounts to the frame.
Illustration 27 g00822693
Attach Tooling (A) and suitable lifting chains to the engine.
Use a hoist to remove the engine and pumps. The weight of the engine and pumps is approximately 680 kg (1500 lb).