GEAR-RING 4595556 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8S-9906     Ratchet Puller     1    
138-7573 Link Bracket     2    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
The O-ring seal must be in position on the front of the equipment pump.
Illustration 1 g00716695
Illustration 2 g00716694
Use a nylon strap, Tooling (A) and a chain in order to put implement pump (5) into position. The weight of the implement pump is 45 kg (100 lb).
Install the washers and four nuts (6) .
Illustration 3 g00716693
Connect hose assemblies (1), (2), (3) and (4) to the equipment pump.
Fill the hydraulic tank with oil. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
Install the rear bottom guard. The weight of the rear bottom guard is 70 kg (155 lb).
Install the floorplate.