AVSPARE.COM
parts catalog

GEAR 4601882 - Caterpillar


4601882 GEAR Caterpillar parts
Rating:
51
Alternative (cross code) number:
CA4601882
460-1882
4601882
Caterpillar 4601882 GEAR
Weight: 1622 pounds 735 kg.

Buy GEAR 4601882 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


If the machine moves during the test, reduce the engine speed immediately, and engage the parking brake.If the machine moved while testing the brakes, consult your Caterpillar dealer for brake inspection and repair. Damaged brakes must be repaired before returning the machine to operation.
Make sure that the area around the machine is clear of personnel and of obstacles.Test the brakes on a dry, level surface.Fasten the seat belt before you test the brakes.
Illustration 1 g00672519
Use the service brake holding ability test to determine if the service brake is functioning properly. The service brake holding ability test is not intended to measure the maximum brake holding effort. While the engine is at a specific rpm, the brake holding effort that is required to hold a machine will vary for different machines. The engine setting, the power train efficiency, the brake holding ability, and other various conditions affect the variances in the brake holding effort.While the service brake is engaged, measure the rpm at the beginning of the machine movement. Compare this measurement with the results from the prior test of your machine. This difference is an indication of the deterioration of the service brake system.
Start the engine and raise all implements slightly.
Apply the service brake.
Release the parking brake.
While the service brake is applied, move the transmission control lever to THIRD SPEED.
Gradually increase the engine speed to high idle. The machine should not move.Note: If the machine begins to move, reduce the engine speed immediately and engage the parking brake.
Reduce the engine speed to low idle.
Move the transmission control lever to the NEUTRAL position.
Engage the parking brake.
Lower all implements to the ground and stop the engine.If the machine moved during the service brake holding ability test, consult your Caterpillar dealer for an inspection of the brakes and for any necessary repairs. Do not operate the machine until the necessary repairs have been completed.


Parts gear Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.