4D1795 GEAR (20 Teeth) Caterpillar parts
12E, 140
Rating:
Alternative (cross code) number:
CA4D1795
4D-1795
4D1795
CA4D1795
4D-1795
4D1795
Weight: 3 pounds 1 kg.
MOTOR GRADER,
You can buy:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$91.77
21 Mar 2023
US: Florida-Parts-Z
4D1795 - New AFTERMARKET Gear (20 Teeth) fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$62.50
21 Feb 2019
Unknown: Unknown
Caterpillar 4D1795 Gear New
$94.11
29 Apr 2018
CTP: CTP
4D1795 Gear Fits Caterpillar
Warranty
Warranty
Number on catalog scheme:
None
For full view, you need register
Information:
Probable Causes
Electronic Control Module (ECM)
Data Link Communication
Electrical Connectors and the WiringRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check for Communications Between Caterpillar Electronic Technician (ET) and the ECM
A. Connect Cat ET to the service tool connector.
B. Restore electrical power to the ECM.
C. Establish communications between Cat ET and the ECM.
ECM
Result Communications is established between Cat ET and the ECM.
The ECM is operating properly.
Proceed to the next step.
Result Cat ET will not communicate with the ECM.
Proceed to Troubleshooting, "Electronic Service Tool Does Not Communicate" for information related to troubleshooting this problem.
2. Check the Data Link Communication
A. Verify communications over the Cat Data Link and the CAN data link, if applicable.
Data Link
Result: A problem is found in the data link.
Repair: Perform any necessary repairs. Refer to Troubleshooting, "Data Link - Test" if a problem with communications via the data links is suspected.
If the problem is not resolved, proceed to the next step.
3. Inspect the Electrical Connectors and the Wiring
A. Remove electrical power from the ECM.
B. Proceed to Troubleshooting, "Electrical Connectors - Inspect" for information related to checking for harness and connector problems.
Connectors
Result: Harnesses and connectors appear to be OK.
Result: There is a problem with the connectors and/or wiring.
Repair: Perform the necessary repairs to the connectors and/or wiring.
4. Keyswitch Power
A. Ensure that keyswitch power is being provided to all of the modules that are on the application.
B. Proceed to Troubleshooting, "Electrical Power Supply - Test" for information that is related to troubleshooting the engines keyswitch circuit.
Power
Result: Keyswitch power is being provided to all of the modules.
Result: There is a problem with the keyswitch power.
Repair: Perform the necessary repairs to the keyswitch and/or modules.
If the problem has not been resolved, consult your technical communicator (TC) for further instructions.
Electronic Control Module (ECM)
Data Link Communication
Electrical Connectors and the WiringRecommended Actions
Table 1
Troubleshooting Test Steps Values Results
1. Check for Communications Between Caterpillar Electronic Technician (ET) and the ECM
A. Connect Cat ET to the service tool connector.
B. Restore electrical power to the ECM.
C. Establish communications between Cat ET and the ECM.
ECM
Result Communications is established between Cat ET and the ECM.
The ECM is operating properly.
Proceed to the next step.
Result Cat ET will not communicate with the ECM.
Proceed to Troubleshooting, "Electronic Service Tool Does Not Communicate" for information related to troubleshooting this problem.
2. Check the Data Link Communication
A. Verify communications over the Cat Data Link and the CAN data link, if applicable.
Data Link
Result: A problem is found in the data link.
Repair: Perform any necessary repairs. Refer to Troubleshooting, "Data Link - Test" if a problem with communications via the data links is suspected.
If the problem is not resolved, proceed to the next step.
3. Inspect the Electrical Connectors and the Wiring
A. Remove electrical power from the ECM.
B. Proceed to Troubleshooting, "Electrical Connectors - Inspect" for information related to checking for harness and connector problems.
Connectors
Result: Harnesses and connectors appear to be OK.
Result: There is a problem with the connectors and/or wiring.
Repair: Perform the necessary repairs to the connectors and/or wiring.
4. Keyswitch Power
A. Ensure that keyswitch power is being provided to all of the modules that are on the application.
B. Proceed to Troubleshooting, "Electrical Power Supply - Test" for information that is related to troubleshooting the engines keyswitch circuit.
Power
Result: Keyswitch power is being provided to all of the modules.
Result: There is a problem with the keyswitch power.
Repair: Perform the necessary repairs to the keyswitch and/or modules.
If the problem has not been resolved, consult your technical communicator (TC) for further instructions.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
120B, 12E, 140, 140B
120B, 12E, 140, 140B
12F, 140, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 140, 140B
12E, 140
120B, 12E
120B, 12E, 14E
12E, 140B, 14E
120, 120B, 12E, 140, 140B
3D9194
GEAR (16 TEETH)
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120, 120B, 12E, 140, 140B
120B, 12E, 12F, 140, 140B, 14E
120, 120B, 12E, 140, 140B
12E, 140