GEAR 4H3482 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     137-7573     Link Bracket     1    Start By:
Remove the axles. Refer to Disassembly and Assembly, "Axle Shaft - Remove". The information is in this manual.
Illustration 1 g00508770
Attach Tooling (A) , an appropriate lifting device and a hoist to final drive assembly (1) . Remove twelve bolts (2) and the washers.
Illustration 2 g00508777
Use two 3/8" - 16 NC forcing bolts (3) in order to remove final drive assembly (1) from the wheel assembly. The final drive assembly weighs approximately 31 kg (68 lb) .