GEAR 4M9215 - Caterpillar

Illustration 1 g02991376
Table 1
Specification for 334-5317 Accessory Drive Gp
Item Qty Part Specification Description
1 1 144-8263 Idler Gear As Bore of the 140-9597 Bushing after assembly is 90.000 0.010 mm (3.5433 0.0004 inch).
Installation depth for the 140-9597 Bushing is 2.3 0.5 mm (0.09 0.02 inch).
Diameter of the 7E-0273 Idler Gear is 96.000 0.025 mm (3.7795 0.0010 inch).
2 1 259-4598 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
3 1 7C-3260 Shaft Diameter is 89.88 0.02 mm (3.539 0.001 inch).
4 1 7N-5874 Auxiliary Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
5 1 7E-0275 Water Pump Drive Gear Bore is 74.980 0.025 mm (2.9520 0.0010 inch).
6 1 7C-3258 Thrust Washer Assembly Apply blue Loctite 242 to the 7N-2047 Dowel.
Protrusion of the 7N-2047 Dowel from the surface is 4.5 0.5 mm (0.18 0.02 inch).
Thickness is 7.00 0.15 mm (0.276 0.006 inch).
7 2 7N-7539 Thrust Washer Thickness is 8.50 0.05 mm (0.335 0.002 inch).