4P1835 GEAR-IDLER Caterpillar parts
Rating:
Alternative (cross code) number:
CA4P1835
4P-1835
4P1835
CA4P1835
4P-1835
4P1835
Weight: 11 pounds 4 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Axenor Blower Motor Control Module CV6Z19E624B, YH1830, 4P1835, 20653
Axenor Interchange Part Numbers – CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Efficient Operation – Manages blower motor speed for consistent airflow. || Durable Construction – Built to withstand varying temperatures and conditions. || Easy Replacement – Simplified design for straightforward installation. || Warranty & Fitment – Comes with a 1-year warranty. Designed as a direct-fit aftermarket replacement. Please check compatibility before ordering, or send your VIN if you're unsure.
Axenor Interchange Part Numbers – CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Efficient Operation – Manages blower motor speed for consistent airflow. || Durable Construction – Built to withstand varying temperatures and conditions. || Easy Replacement – Simplified design for straightforward installation. || Warranty & Fitment – Comes with a 1-year warranty. Designed as a direct-fit aftermarket replacement. Please check compatibility before ordering, or send your VIN if you're unsure.
Alisaouse Blower Motor Control Module CV6Z19E624B, YH1830, 4P1835, 20653
Alisaouse Interchange Part Number: CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Speed Regulation: Ensures accurate control of the blower motor speed for optimal performance. || Durable Construction: Built to withstand harsh conditions, providing long-lasting reliability. || Easy Installation: Designed for a straightforward installation process, saving time and effort. || Warranty & Fitment: Includes 1-year warranty. Direct-fit replacement. Please check compatibility before purchase; send VIN if unsure.
Alisaouse Interchange Part Number: CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Speed Regulation: Ensures accurate control of the blower motor speed for optimal performance. || Durable Construction: Built to withstand harsh conditions, providing long-lasting reliability. || Easy Installation: Designed for a straightforward installation process, saving time and effort. || Warranty & Fitment: Includes 1-year warranty. Direct-fit replacement. Please check compatibility before purchase; send VIN if unsure.
TOPAZ 6G9T-19E624-DB HVAC Blower Motor Resistor Compatible with 2013-2018 Ford C-MAX 2012 Focus
TOPAZ VEHICEL COMPATIBLE - HVAC Blower Motor Resistor compatible with 2013-2018 Ford C-MAX | compatible with 2012 Ford Focus || Good Quality-100% new and high quality for long-lasting durability, engineered from high-quality materials to improve the reliability and durability || Installation- fits and functions like original equipment for a trouble-free installation. || OEM / Replacement Part Number - 6G9T19E624DB, CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
TOPAZ VEHICEL COMPATIBLE - HVAC Blower Motor Resistor compatible with 2013-2018 Ford C-MAX | compatible with 2012 Ford Focus || Good Quality-100% new and high quality for long-lasting durability, engineered from high-quality materials to improve the reliability and durability || Installation- fits and functions like original equipment for a trouble-free installation. || OEM / Replacement Part Number - 6G9T19E624DB, CV6Z19E624B, YH1830, 4P1835, 20653, RU898 || Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9EL3121 Axle Lifting Lug 2 Note: Ensure that the mating surfaces of the oscillating axle assembly and the rear frame are clean prior to the installation of the oscillating axle assembly.
Position the rear axle assembly under the rear frame.
Illustration 1 g01210382
Note: When raising the rear axle assembly to the rear frame, ensure that the dowels and the bolt holes in the trunnion supports align with the holes in the mounts of the rear frame.
Attach Tooling (A) and a suitable lifting device to the rear axle assembly. The weight of the rear axle assembly is approximately 1595 kg (3517 lb). Raise the rear axle assembly to the rear frame.
Illustration 2 g01210385
Install bolts (19), (20), nuts (21) and nuts (24) to the rear trunnion support. Tighten nuts (21) and nuts (24) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (22) and locknuts (23) .
Illustration 3 g01210384
Right side of rear support
Install two bolts (17) and two nuts (15) to the rear trunnion support.
Tighten nuts (15) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (16) .
Connect hose assembly (18) .
Illustration 4 g01210383
Left side of rear support
Install two bolts (14) and two nuts (11) to the rear trunnion support.
Tighten nuts (11) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (12) .
Connect hose assembly (13) .
Illustration 5 g01210381
Connect lubrication hose assembly (10) .
Illustration 6 g01210380
Connect lubrication hose assembly (8) .
Install bolt (7) and bolt (9) to the clips.
Illustration 7 g01210379
Connect hose assemblies (5) and (6) .
Illustration 8 g01210377
Connect hose assembly (4) .
Illustration 9 g01210376
Lower left side fender (3) back into position.
Illustration 10 g01210362
Position fender (1). Install five bolts (1) .
Lubricate the rear axle trunnion bearings. Refer to Operation and Maintenance Manual, "Rear Axle Trunnion Bearings - Lubricate".
Fill the rear differential and final drive assemblies. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil (With Axle Oil Cooler) - Change" or Operation and Maintenance Manual, "Differential and Final Drive Oil (Without Axle Oil Cooler) - Change".
Purge the air from the braking system. Refer to Systems Operation, Testing and Adjusting, "Braking System Air - Purge".
Check the oil level of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".End By:
Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".
Install the rear tires and rims. Refer to Disassembly and Assembly, "Tire and Rim - Install".
Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9EL3121 Axle Lifting Lug 2 Note: Ensure that the mating surfaces of the oscillating axle assembly and the rear frame are clean prior to the installation of the oscillating axle assembly.
Position the rear axle assembly under the rear frame.
Illustration 1 g01210382
Note: When raising the rear axle assembly to the rear frame, ensure that the dowels and the bolt holes in the trunnion supports align with the holes in the mounts of the rear frame.
Attach Tooling (A) and a suitable lifting device to the rear axle assembly. The weight of the rear axle assembly is approximately 1595 kg (3517 lb). Raise the rear axle assembly to the rear frame.
Illustration 2 g01210385
Install bolts (19), (20), nuts (21) and nuts (24) to the rear trunnion support. Tighten nuts (21) and nuts (24) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (22) and locknuts (23) .
Illustration 3 g01210384
Right side of rear support
Install two bolts (17) and two nuts (15) to the rear trunnion support.
Tighten nuts (15) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (16) .
Connect hose assembly (18) .
Illustration 4 g01210383
Left side of rear support
Install two bolts (14) and two nuts (11) to the rear trunnion support.
Tighten nuts (11) to a torque of 1050 150 N m (775 110 lb ft).
Install locknuts (12) .
Connect hose assembly (13) .
Illustration 5 g01210381
Connect lubrication hose assembly (10) .
Illustration 6 g01210380
Connect lubrication hose assembly (8) .
Install bolt (7) and bolt (9) to the clips.
Illustration 7 g01210379
Connect hose assemblies (5) and (6) .
Illustration 8 g01210377
Connect hose assembly (4) .
Illustration 9 g01210376
Lower left side fender (3) back into position.
Illustration 10 g01210362
Position fender (1). Install five bolts (1) .
Lubricate the rear axle trunnion bearings. Refer to Operation and Maintenance Manual, "Rear Axle Trunnion Bearings - Lubricate".
Fill the rear differential and final drive assemblies. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil (With Axle Oil Cooler) - Change" or Operation and Maintenance Manual, "Differential and Final Drive Oil (Without Axle Oil Cooler) - Change".
Purge the air from the braking system. Refer to Systems Operation, Testing and Adjusting, "Braking System Air - Purge".
Check the oil level of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".End By:
Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".
Install the rear tires and rims. Refer to Disassembly and Assembly, "Tire and Rim - Install".
Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Parts gear Caterpillar catalog:
4N6904
GEAR
Caterpillar
Caterpillar
4N0931
GEAR A
Caterpillar
Caterpillar
4N0910
GEAR A
Caterpillar
Caterpillar
4N0868
GEAR IDLER
Caterpillar
Caterpillar
4N0858
GEAR
Caterpillar
Caterpillar
4N0692
GEAR A
Caterpillar
Caterpillar
4P3131
GEAR-IDLER
Caterpillar
Caterpillar
4P3129
GEAR-IDLER
Caterpillar
Caterpillar
4P2996
GEAR
Caterpillar
Caterpillar
4P1965
GEAR-BALANCER
Caterpillar
Caterpillar
4P1837
GEAR-PUMP
Caterpillar
Caterpillar
4P1836
GEAR-IDLER
Caterpillar
Caterpillar