GEAR G 4W5435 - Caterpillar

Adjustment of Updrive Gears End Play
Illustration 1 g01049705
Prior to assembly of the components use 0.038 mm (0.0015 inch) shim stock or a standard feeler gauge to check the following:
Ensure that the bearing cups are seated in the bearing cages.
Ensure that the bearing cones are seated on the gears.
Prior to assembly, lubricate the bearing cups and the bearing cones with the lubricant that is being sealed.
Install the O-ring seals on adapter (2).
Install adapter (2).
Apply Loctite 7649 Primer N and then apply Loctite 271 to bolts (1) prior to assembly. Install bolts (1) and tighten the bolts