GEAR & CASE GP-TRANSFER 5260637 - Caterpillar

Table 3
Troubleshooting Test Steps Values Results
1. Check for Associated Codes
A. Connect to Cat® Electronic Technician (ET).
B. Download the "Warranty Report" from the engine ECM before performing any troubleshooting or clearing diagnostic trouble codes.
C. Check for an active associated code.
Associated Codes
Result: An associated code is active.
Repair: Troubleshoot the associated code. Refer to Troubleshooting for the proper procedure.
Once the associated code has been resolved, starting the engine will remove the inducement and the inducement code will become logged.
Engine Emissions Operator Inducement Service Mode Override
This override allows the service technician to disable the inducement in order to troubleshoot problems. Factory passwords are required to activate this override. Once the override is activated, it is possible to navigate to other Cat ET functions. In most cases the "Engine Emissions Operator Inducement Service Mode Override" will not need to be activated because the service tests performed in the applicable troubleshooting procedure will automatically reset the inducement. The "Engine Emissions Operator Inducement Service Mode Override" is located in the "Diagnostic Tests", "System Troubleshooting Section" of the engine ECM.