GEAR-PLANETARY 5364464 - Caterpillar

Illustration 1 g01113843
(1) Torque for four bolts ... 1600 200 N m (1180 150 lb ft) (2) Install the equalizer bar with the word "FRONT" toward the front of the machine. (3) Apply 4C-4032 Bearing Mount Compound to the bearing bore of the equalizer bar before installing the seal (two places). (4) Apply 4C-9506 Retaining Compound to the threads of the setscrews. Install the setscrews just below the surface of the bar. (5) Add lubricant (90W gear oil) through the fitting. Add oil until the oil covers the hex on the fitting. Refill after the machine has been exercised. (6) Before the pin is installed, apply a light coat of the oil that is being sealed to the inside diameter of the seals. Install the pin so that the pin is even with the surface of the roller frame at the rear. (7) Install the bearing even with the surface of the bearing bore on the side of the equalizer bar that is marked "FRONT". Apply 3% molybdenum grease to the internal surface of the bearing before the pin is assembled. (8) Apply 4C-4032 Bearing Mount Compound to this surface (two places). Install the seals with the part number toward the outside of the equalizer bar. (9) Apply 4C-5592 Anti-Seize Compound to the pin bore in the equalizer bar. (10) Apply 4C-5592 Anti-Seize Compound to the end of the pin.