5C3714 GEAR (60 teeth) Caterpillar parts
215, 215B
Rating:
Alternative (cross code) number:
CA5C3714
5C-3714
5C3714
CA5C3714
5C-3714
5C3714
Weight: 7 pounds 3 kg.
EXCAVATOR,
Related part:
5C3714
GEAR-YM
2310222
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$118.84
11 Jun 2022
US: QUALITY PARTS
Made to fit 5C3714 Gear Caterpillar
G&T Engine Parts 5C3714 Caterpillar Gear || Meets OEM Specs for Fit and Performance || This is a new item 5C3714 Gear Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 5C3714 Caterpillar Gear || Meets OEM Specs for Fit and Performance || This is a new item 5C3714 Gear Caterpillar || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$110.39
21 Feb 2019
Unknown: Unknown
Caterpillar 5C3714 Gear New
04 Dec 2018
761 Hundredths Pounds
CTP: CTP
Caterpillar 5C-3714 Cat¨ Spur Gears (5C3714) New Aftermarket By CTP
5C3714 Caterpillar, Drive Train Parts Weight(lbs): 7.60 Length(cm): 22.0000 Width(cm): 4.7000 Depth(cm): 22.0000
5C3714 Caterpillar, Drive Train Parts Weight(lbs): 7.60 Length(cm): 22.0000 Width(cm): 4.7000 Depth(cm): 22.0000
Number on catalog scheme:
22
For full view, you need register
Information:
Refer to Reuse And Salvage Guidelines, SEBF8049, "Visual Inspection of the Piston" and Reuse And Salvage Guidelines, SEBF8051, "Inspection and Measuring Procedures for Piston Pins".
Illustration 1 g01516394
Piston and rod
(1) Piston crown assembly
(5) Piston skirt Thoroughly lubricate the outer surface of the entire piston and the piston rings with clean engine oil before installation in the cylinder block.Top Piston Ring (2)
Install the piston ring with the side marked "UP-1" toward the top of the piston. The blue color stripe and the yellow color stripe must be to the right of the ring end gap.Thickness of new top piston ring ... 3.83 mm (0.151 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.35 0.05 mm (0.014 0.002 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Intermediate piston ring (3)
Install the piston ring with the side marked "UP-2" toward the top of the piston. The violet color stripe must be to the right of the ring end gap.Width of groove in new piston for the intermediate piston ring ... 3.070 0.010 mm (0.1209 0.0004 inch)Thickness of new intermediate piston ring ... 3.005 0.015 mm (0.1183 0.0006 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.70 0.10 mm (0.028 0.004 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Oil control ring (4)
The spring ends of the piston ring should be assembled 180 degrees from the ring end gap. The blue color stripe can be to the right or to the left of the ring end gap.Width of groove in new piston for the oil control piston ring ... 4.03 0.01 mm (0.159 0.001 inch)Thickness of new oil control piston ring ... 3.98 0.01 mm (0.157 0.001 inch)Clearance between the groove and the new oil control piston ring ... 0.05 0.02 mm (0.002 0.001 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.45 0.15 mm (0.018 0.006 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Note: After all of the piston rings have been installed, rotate the piston rings so that the end gaps are separated by 120 degrees.Piston Pin (6)
Diameter of new piston pin ... 59.975 0.005 mm (2.3612 0.0002 inch)Length of the piston pin ... 89.80 0.15 mm (3.535 0.006 inch)Bore in the body of the piston for the piston pin ... 60.0925 0.0075 mm (2.36580 0.00030 inch)Note: Thoroughly lubricate the piston pin with clean engine oil before assembly.
Illustration 1 g01516394
Piston and rod
(1) Piston crown assembly
(5) Piston skirt Thoroughly lubricate the outer surface of the entire piston and the piston rings with clean engine oil before installation in the cylinder block.Top Piston Ring (2)
Install the piston ring with the side marked "UP-1" toward the top of the piston. The blue color stripe and the yellow color stripe must be to the right of the ring end gap.Thickness of new top piston ring ... 3.83 mm (0.151 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.35 0.05 mm (0.014 0.002 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Intermediate piston ring (3)
Install the piston ring with the side marked "UP-2" toward the top of the piston. The violet color stripe must be to the right of the ring end gap.Width of groove in new piston for the intermediate piston ring ... 3.070 0.010 mm (0.1209 0.0004 inch)Thickness of new intermediate piston ring ... 3.005 0.015 mm (0.1183 0.0006 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.70 0.10 mm (0.028 0.004 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Oil control ring (4)
The spring ends of the piston ring should be assembled 180 degrees from the ring end gap. The blue color stripe can be to the right or to the left of the ring end gap.Width of groove in new piston for the oil control piston ring ... 4.03 0.01 mm (0.159 0.001 inch)Thickness of new oil control piston ring ... 3.98 0.01 mm (0.157 0.001 inch)Clearance between the groove and the new oil control piston ring ... 0.05 0.02 mm (0.002 0.001 inch)Clearance between the ends of the piston ring in a cylinder liner bore of 137.16 mm (5.400 inch) ... 0.45 0.15 mm (0.018 0.006 inch)Increase in the clearance between the ends of the piston ring for each 0.03 mm (0.001 inch) increase in the cylinder liner bore ... 0.08 mm (0.003 inch)Note: After all of the piston rings have been installed, rotate the piston rings so that the end gaps are separated by 120 degrees.Piston Pin (6)
Diameter of new piston pin ... 59.975 0.005 mm (2.3612 0.0002 inch)Length of the piston pin ... 89.80 0.15 mm (3.535 0.006 inch)Bore in the body of the piston for the piston pin ... 60.0925 0.0075 mm (2.36580 0.00030 inch)Note: Thoroughly lubricate the piston pin with clean engine oil before assembly.
Caterpillar parts catalog:
Parts gear Caterpillar catalog:
215, 215B
215, 215B, 215C
215, 215B, 215C
215, 215B, 215C
215, 225, 225D, 229, FB221
215, 225, 225D, 229, FB221
215, 215B, 215C
215, 215B, 215C
215, 215B, 215C
215, 225, 225D, 229, FB221
215, 225, 229
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
215, 215B, 215C
215, 215B, 215C
215, 215B, 215C
12F, 140B, 14E, D6C
12F, 140B, 14E, D6C
12F, 140B, 14E, D6C
215, 518, 910, 916, 920, CS-643, IT18B
215, 518, 910, 920
215, 215B, 215C