GEAR ASSEM. (35 Teeth) 5D8512 - Caterpillar

Table 1
Effectivity    
S/N:5ZL00125-UP    
S/N:7TJ00002-UP    
S/N:4CS00219-UP    
S/N:7LL00106-UP    
S/N:4HZ00237-UP    
S/N:6JC00109-UP    
S/N:2TK00115-UP    
S/N:5ER00128-UP    
S/N:AFS00101-UP    
S/N:84A75105-UP    
S/N:4YC78003-UP    
S/N:4XJ78002-UP    
S/N:3PR78005-UP    
S/N:FKR01885-UP    
S/N:2YW00106-UP    
S/N:2PZ00107-UP    
S/N:8GB78009-UP    
S/N:6HK99382-UP    
S/N:1HW00135-UP    
S/N:APX75002-UP    
S/N:5AZ00428-UP    
S/N:MSY00549-UP    
S/N:DMC00156-UP    
S/N:9ZC78003-UP    
S/N:2BW83002-UP    
S/N:SHH00315-UP    
S/N:SPD00415-UP    
S/N:3SJ75002-UP    
S/N:1HL78008-UP    
S/N:4AR77003-UP    
S/N:4GZ00002-UP    
S/N:ATY01125-UP    
S/N:CBR00109-UP    
S/N:FDB01704-UP    
S/N:5YW00278-UP    
S/N:JSM00489-UP    
S/N:9YF77002-UP    
S/N:3TZ00381-UP    
S/N:44200341-UP    
S/N:DWC00358-UP    
S/N:SE401716-UP    Rework Procedure
Table 2
Qty    New Pt. No.    Former Pt. No.    
2     0S-1571 Bolt     0S-1594 Bolt    
1     361-7097 Ring     8N-1991 Retaining Ring    
1     361-7098 Flange     8N-1992 Retainer    
Illustration 1 g03289320
(1) 0S-1594 Bolt (2) 5M-2894 Hard Washer (3) 8N-1992 Retainer (4) 0L-1351 Bolt (5) 0S-1571 Bolt
Remove bolts (1), (4), and (5). Bolts (4) and (5) and washers (2) will be reused.
Remove the tube.
Illustration 2 g03289321
(2) 5M-2894 Hard Washer (3) 8N-1992 Retainer (4) 0L-1351 Bolt (5) 0S-1571 Bolt (6) 361-7098 Flange (7) 361-7097 Ring
Install one ring (7) and flange (6) onto the tube.
Attach the tube to the oil block using two bolts (5) and washers (2). Attach the opposite end of the tube to the oil filter housing using the previously removed hardware.
Install bolts (4) .