GEAR GP-FRONT 5I7763 - Caterpillar

Internet
The Factory Password System (FPS) is a secure web site and a password is required. Proceed to step 1.a if you do not have a "Login ID" and a "Password". Proceed to step 2 if you already have a "Login ID" and a "Password".
Refer to the "Telephone Help Line" section or see your Caterpillar dealer in order to obtain the factory password.
Open your web browser. Enter the address for the Factory Password System (FPS) (“http://fps.cat.com”) in the address bar of the web browser. Upon accessing FPS, the "Corporate Web Security" web site will appear.
Illustration 1 g03866210
Corporate web Security screen
Enter your "Login ID" and "Password" into the "Corporate Web Security" site. Refer to Illustration 1.
Illustration 2 g03866226
Product Serial Number
Enter the following information:
"Product Serial Number"
"Engine Units"Note: Enter the hours that are displayed on the service hour meter in the "Engine Units" block. Select "Hours" as the unit.
"Service Tool Serial Number"
"ECM Serial Number"
"Total Tattletale Value"
"Reason Code"Note: The "Rerate" section is not used with the Machine Security System. Do NOT enter information in this section.Note: The information that is listed may be obtained from the "Enter Factory Passwords" screen in the Caterpillar Electronic Technician (ET). Refer to Illustration 3.
Illustration 3 g03866234
Factory Password
Illustration 4 g03866248
Generated Password
Enter all the required information. Then click the "Generate Password" button. The passwords will then be generated.
Illustration 5 g03866310
FPS Password Created confirmation screen
Record both of the factory passwords.
Illustration 6 g03866328
MSS Enter Factory Passwords screen
Refer to Illustration 6. Enter the factory password 1 in the "Factory Password #1" field and enter factory password 2 in the "Factory Password #2" field. Note: Both passwords are required in order to change any of the parameters of the Machine Security System.Telephone Help Line
The Telephone Help line for obtaining a Factory Password is the same number assigned to the Dealer Solutions Network (DSN) and is listed below: (309) 636-8500
You will need the information listed below, in order to obtain a Factory Password:
"Product Serial Number"
Service Meter Hours ("Engine Unit Block")
Serial number of the Service Tool (Electronic Technician)
Serial Number of the MSS3s ECM
Total Tattletale Value
Reason CodeNote: The information that is listed may be obtained from the "Enter Factory Passwords" screen in the Caterpillar Electronic Technician (ET). Refer to Illustration 6.
Illustration 7 g03866252