GEAR (183 TEETH) 5L5302 - Caterpillar

Illustration 2 g02027739
(2) Pedestal MountThere are two mountings available for the display. The ceiling mount is mounted to the upper left of the operator, to the ceiling of the cab. The pedestal mount is mounted to the right of the operator, on the floor of the cab. Refer to the Illustrations 1 and 2 above.Display
Illustration 3 g02606362
(3) Camera View (4) Arrows Button (5) "OK" Button (6) Tab Button (7) Brightness Button (8) Alarm Check (9) Alarm (10) Product ID (11) Indicator for the System (12) Proximity BarThe following information lists the functions of the display:
The display monitors the data from the system components
The display monitors the status of the system components
The display shows the information to the operator
The display warns the operator of objects and/or faults
The display provides an operator interface in order to control the systemThe display consists of the following components:
Button (function) that are located on the right side of the display
An audible alarm that is located on the bottom right portion of the displayMedium Range Object Detection Sensor
Illustration 4 g02662616
(13) Medium Range Object Detection Sensor Enclosure (14) Medium Range Object Detection SensorTwo medium range radar sensors are used on the front of the machine. Four medium range radar sensors are used on the rear of the machine. One sensor will be used on each side of the machine. Sensors provide information for the range to the object.Component Locations
Front Object Detection Sensors and Camera
Illustration 5 g02649358
(15) Front Camera
Illustration 6 g02662656
(16) Front Object Detection SensorRear Object Detection Sensor and Camera
Illustration 7 g02649422
(17) Rear Object Detection Sensors and CameraLeft Object Detection Sensor, Camera, and External Light
Illustration 8 g02583696
(18) External Light (19) Camera (20) Left Object Detection SensorRight Object Detection Sensor, Camera, and External Light
Illustration 9 g02584316
Right Object Detection Sensor, Camera, and External LightDisplay
Illustration 10 g02581556
Display for Cat Detect Object Detection SystemCamera
Illustration 11 g01223051
The cameras provide the operator with a view of critical areas around the truck for use in identifying objectsExternal Lights
Illustration 12 g01843254
Example of an External LightThe external lights are mounted to the same brackets that are used for the cameras. The mounting brackets are installed on the left side and the right side of the machine. The lights provide illumination for the cameras that are installed on the sides of the machine. The lights are controlled by the display.