GEAR ASSEM. (30 AND 72 TEETH) 5L8642 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     4C-4030     Thread Lock Compound        
Personal injury or death can result from machine articulation or movement.Machine frames can move and a person can be crushed.Connect the steering frame lock link between the front and rear frames before working on machine. Secure clevis pin with locking pin.Before operating the machine, fasten the steering frame lock link into the stored position and secure the clevis pin with locking pin.Failure to lock into the stored position before operating can result in loss of steering.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01004935
Install fittings (7) .
Illustration 2 g01004934
Apply Tooling (A) to bolts (5) .
Position plate (6) on the metering pump and install bolts (5) .
Position the metering pump and plate (6) under the steering column.
Illustration 3 g01004933
Install bolts (4) .
Illustration 4 g01004932
Install floormat (3) .
Illustration 5 g01004931
Connect hose assemblies (2) to metering pump (1) .End By:
Check the hydraulic oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the proper procedure.